Egr removal

[frankx]

still no go on block head earth

Can't find 173 fairly st, the guys in J F Autos have also never heard of it and they are on the corner of Woodville and Fairley st.

hi guy's tyred that wire on bottom starter bracket witch is engine block earth also have earth running staight from batterie neg. earth to bulk head still no go took another pic of that wire tested again with ign. on reg. 5.10 volts as you can see in pic. heavey padding on the core loom definately not earth address 174 woodville street sorry mate my mistake big iron gates in between fraser mac donalds and protors garage amg tyres just ask for alec murty's place if you let me know what time your comming at?. i'll stand out in street what car are ye driving?

[NiftyNev]

30 amp fuse 30 amp relay to button from ign. switch one first things i checked on the list glow plugs took them all out . regarding 2 wires. got me baffeld. i post few pics of layout egr removed 2 wires in photo location as where they go? still miserty

If you have a manual glow system then that may explain the disconnected wires. Not needed now, so someone disconnected them from the resistor. Have you had a look to see if the resistor is there and has any wires connected to it. Not convinced they are earth wires but may be wrong.

Nev

[yoshie]

Can't find 173 fairly st, the guys in J F Autos have also never heard of it and they are on the corner of Woodville and Fairley st.

[dazandcaz]

Have you tried this?

I could spend hours reading the drivel on there. Oh wait, thats what this thread is for!


Honest guv, it came up with this...
"Why does the willing mass cough her diesel?"

[meooo]

See here

You owe me a laptop due to tea spitage....

[Sancho]

Frank, you do know there is only one fuel line on your fuel filter don't you?

Is that where the wires go?

[flounderbout]

See here

[Chillitt]

Frank, you do know there is only one fuel line on your fuel filter don't you?

[frankx]

earth to manifold

Have you tried this?

try'd on manifold na starto and to chassis still know start that was wk ago before starter packed in but tomorrow another day try putting them back on block see what happens but with ignition on showing 6.8 volts so how that if or guy's saying they're earth

[frankx]

spec savers

See here

ah know should went ta but can't find the place

[BUSHWHACKER]

See here

[frankx]

live wires

[Q yo bro tested them with ignition on registerimg 6.8 volts doubt it? if they're earth? if read my threads already tryed them first on manifold and then body earth thats what nackered starterfirst place so back to beating the drums or could waiting for right answer-------------------------are you hundred percent sure or just guessing?[/QUOTE

[BUSHWHACKER]

The wires with the ring terminal shown in your photos are earth wires.

[flounderbout]

Have you tried this?

[frankx]

live wires

They're earth wires.

yo bro tested them with ignition on registerimg 6.8 volts doubt it? if theyre if read my threads already tryed them first on manifold and then body earth thats nackered started up cranking