Help!!!!!!!!

[BUSHWHACKER]

Where is that!!!!! i will check, is that attahced to the big lump of cabling i keep pushin out of the way to get to kickdown cable on gearbox

At the base of the gear shift lever, on the end of the shift linkage.

I thought I already said that!

You still haven't said whether your reverse bleeper still sounds when selecting reverse. This is your last chance, failure to respond will give me the excuse I need not to bother with this thread any more!

[BioHazard]

Explained here...
http://www.toyotanation.com/forum/sh...d.php?t=245436

I'll give that a look.....................Thank you o hall monitor ....... did you tell nibble and orifice off


http://www.hiluxsurf.co.uk/forums/sh...ad.php?t=58433




BTW i do get lights and bleeper

[BigBobE]

At the base of the gear shift lever, on the end of the shift linkage.

I thought I already said that!

You still haven't said whether your reverse bleeper still sounds when selecting reverse. This is your last chance, failure to respond will give me the excuse I need not to bother with this thread any more!

sorry my bad, i had not checked that... yes bleepers work perfect, after i changed atf and pricked about with kick down cable i headed for home, reversing out of garedn i put it into reverse, and noticed i had to give it a bit more throttle than usual to make it move, then forward whole way home, motorway felt funny, not hitting over drive gears then either.... checked ATF level and seemed ok, just changed kick down cable today and now tomorrow i put it all back together, and check that multi plug yokie, then if that dont work its off to see if stormmy has an ecu

[BUSHWHACKER]

sorry my bad, i had not checked that... yes bleepers work perfect, after i changed atf and pricked about with kick down cable i headed for home, reversing out of garedn i put it into reverse, and noticed i had to give it a bit more throttle than usual to make it move, then forward whole way home, motorway felt funny, not hitting over drive gears then either.... checked ATF level and seemed ok, just changed kick down cable today and now tomorrow i put it all back together, and check that multi plug yokie, then if that dont work its off to see if stormmy has an ecu

You didn't mention that before about giving it extra throttle to make it reverse!
So reverse is present, just not fully.
Do you know how to check the ATF level correctly? as you say it 'seemed ' ok.

[BigBobE]

You didn't mention that before about giving it extra throttle to make it reverse!
So reverse is present, just not fully.
Do you know how to check the ATF level correctly? as you say it 'seemed ' ok.

sorry only had reverse for that 12m of reversing and then none what so ever, i have sound and beeping from reverse but no movement, to check ATF i run engine go up and down throught the gears 3 seconds in each gear for 4 trips up and down :P then dip it, and its just above high on cold..... this is from cold start

[BioHazard]

You didn't mention that before about giving it extra throttle to make it reverse!
So reverse is present, just not fully.
Do you know how to check the ATF level correctly? as you say it 'seemed ' ok.

Then it is more likely to be atf or torque converter for him then ......


that make mine a bigger pile of poo

[BUSHWHACKER]

sorry only had reverse for that 12m of reversing and then none what so ever, i have sound and beeping from reverse but no movement, to check ATF i run engine go up and down throught the gears 3 seconds in each gear for 4 trips up and down :P then dip it, and its just above high on cold..... this is from cold start

With the engine still running when you checked to dipstick?

[BigBobE]

With the engine still running when you checked to dipstick?

yeah

[BigBobE]

Then it is more likely to be atf or torque converter for him then ......


that make mine a bigger pile of poo

but i still have most of forward gears just no over drive :P

[BioHazard]

I have good forward drive and exclent acceration just no reverse .....if it struggles for forward drive too the torque converter or atf fluid is suspect ...........is it leaking ????

[MattF]

I have good forward drive and exclent acceration just no reverse .....if it struggles for forward drive too the torque converter or atf fluid is suspect ...........is it leaking ????

Any chance it could be something like this causing your, (and possibly Bob's), problem?

http://www.toyotasurf.asn.au/forum/viewtopic.php?t=6073

[BioHazard]

Any chance it could be something like this causing your, (and possibly Bob's), problem?

http://www.toyotasurf.asn.au/forum/viewtopic.php?t=6073

wibble ......i have a a few now and cannot see for looking ether hilight or tellme i'm a wnkr

[MattF]

Thrust bearing.

[BioHazard]

Thrust bearing.

Thats a manual problem or am i a tw4t

[MattF]

According to that thread, there's one in the torque convertor. Sounds like it's more like a plastic type slip ring than an actual bearing though.