general grabbers wont fit!!

[Albannach]

my standard tyres were rubbing on the inside edge of the bumper, the springs were shot, sounds like the garage dont have a clue. I changed mine and gave it a 2" inch lift, no more probs

His ride hight is ok though.

[Albannach]

old tyres are back on so prob wouldnt be much good would it?

Aye, post them anyway, the turd gen guys may spot something.

[si tate]

its 420 - 430mm

Same as mine.

[Albannach]

Maybe he's measuring your truck by mistake?

[charvell]

the tread depth may be the issue

[si tate]

the tread depth may be the issue

The tread would have to be 40mm+ thick to touch anywhere.

[Bogus]

I know this is not helpful but I have General Grabber AT2s 265/75/16 on mine with no rubbing of bumpers. Theyre close, but as I say no rubbing, and they were fine when fitted new a few thousand miles back.

Bogus

[wishbone]

Different alloys to standard (different offset ?) or wheel spacers fitted ?

Rob.

[anthony whatford]

Aye, post them anyway, the turd gen guys may spot something.

[anthony whatford]

Different alloys to standard (different offset ?) or wheel spacers fitted ?

Rob.

no all standard

[anthony whatford]

no all standard

[goodcat]

upload your pic to a hosting site. i use Photobucket.com or uk? then hold the mouse arrow (cursor) over the pic and lower it down to its over the IMG code. left click on it till it highlights it all in blue then right click and COPY. then JUST paste it in here where you type.

[anthony whatford]

Aye, post them anyway, the turd gen guys may spot something.

http://picasaweb.google.co.uk/anthon...eat=directlink

[si tate]

http://picasaweb.google.co.uk/anthon...eat=directlink

You appear to have more than enough room there mate, weird

[yoshie]

My 3rd gen sits much higher than that standard

only pic i have to hand sorry