1 1/2 inch body lift

[stormforce]

I think I can live with doing that thanks

Chris you will have to lower the rad in yours as you've got a 2.4. If you dont then the rad will be higher than the rad cap and could cause air locks

[ohsupremebeing]

Chris you will have to lower the rad in yours as you've got a 2.4. If you dont then the rad will be higher than the rad cap and could cause air locks

That sounds harder then lowering the rad surround but if it has to be done then it has to be done

so the list to mod for a 1 1/2 inch body list is

lower rad
lift bumers
drill holes in bulkhead plate 2mm bigger to allow it to be lowered lower for steering column

and start lift on drivers side

anything else

[stormforce]

That sounds harder then lowering the rad surround but if it has to be done then it has to be done

so the list to mod for a 1 1/2 inch body list is

lower rad
lift bumers
drill holes in bulkhead plate 2mm bigger to allow it to be lowered lower for steering column

and start lift on drivers side

anything else

undo the fuel filler pipe in the rear wheal arch before lifting but remember to do it back up again after.(only need to slacken it not take it off)

unclip the brakelines from the body underneath near to where they go to the axel so you dont damage them

[BUSHWHACKER]

That sounds harder then lowering the rad surround but if it has to be done then it has to be done

so the list to mod for a 1 1/2 inch body list is

lower rad
lift bumers
drill holes in bulkhead plate 2mm bigger to allow it to be lowered lower for steering column

and start lift on drivers side

anything else

Lift bumers??!!



What ever floats yer boat mate!

[Apache]

Lift bumers??!!

Elevator Chutney Ferrets?

[BUSHWHACKER]

Elevator Chutney Ferrets?

Gay midgets?

[ohsupremebeing]

so the list to mod for a 1 1/2 inch body list is

lower rad
lift bumpers
adjustment to steering column
drill holes in bulkhead plate 2mm bigger to allow it to be lowered lower for steering column
undo fuel filler pipe
unclipe brakelines from body at rear axel

and start lift on drivers side

anything else


you lot dont miss anything do u lol

[stormforce]

so the list to mod for a 1 1/2 inch body list is

lower rad
lift bumpers
drill holes in bulkhead plate 2mm bigger to allow it to be lowered lower for steering column
undo fuel filler pipe
unclipe brakelines from body at rear axel

and start lift on drivers side

anything else


you lot dont miss anything do u lol

not sure if you need to do it but you may need to unclip the handbrake cable from the chasis before it goes to the wheels

[Hilux]

so the list to mod for a 1 1/2 inch body list is

lower rad
lift bumpers
drill holes in bulkhead plate 2mm bigger to allow it to be lowered lower for steering column
undo fuel filler pipe
unclipe brakelines from body at rear axel

and start lift on drivers side

anything else


you lot dont miss anything do u lol

YEAH my phone is out of order

[ohsupremebeing]

YEAH my phone is out of order

whats that got to do with my lift $$$$ off he he he

[BUSHWHACKER]

so the list to mod for a 1 1/2 inch body list is

lower rad
lift bumpers
drill holes in bulkhead plate 2mm bigger to allow it to be lowered lower for steering column
undo fuel filler pipe
unclipe brakelines from body at rear axel

and start lift on drivers side

anything else


you lot dont miss anything do u lol

Either Apache's truck was once lifted and then lowered before he bought it, or it's one of the easiest trucks to 'lift', 'cos the only two (extra) things we done when fitting a 2" body lift was to raise the front bumper and lower the rad!!!

[BUSHWHACKER]

not sure if you need to do it but you may need to unclip the handbrake cable from the chasis before it goes to the wheels

Nope.

[Apache]

Either Apache's truck was once lifted and then lowered before he bought it, or it's one of the easiest trucks to 'lift', 'cos the only two (extra) things we done when fitting a 2" body lift was to raise the front bumper and lower the rad!!!

Well now my steering column grommet has worn away anyway...

Must make a new one someday.

[BUSHWHACKER]

Well now my steering column grommet has worn away anyway...

Must make a new one someday.

But isn't your steering column at max. adjustment anyway?

[Apache]

But isn't your steering column at max. adjustment anyway?

There probably wasn't a lot to play with, certainly not on the splines in the engine bay...