Lexurf IV.

[BUSHWHACKER]

Yea, the 1st part of the post was sort of directed at the G man..

Yea, I've just repaired my set, although they were flickering, not completely out..but..snapped the speed needle scraping the flakey conductive paint off, balls.!

What you after for the set you have then :o)

You can have them for 15 bucks, posted.

[an1mal_69]

Cool, well i got a spare room you can borrow if you want to make a day of it one wkend. Hopefully the 'Lovley Boyo' will be putting a trip together again before mine comes off the road for winter..one last fling an all that :o)

[gwh200]

G,day animal. LexurfIV will be my 3rd surf. As with the previous two, it's natural habitat will be Wales...especially your particular region.
and you are more than welcome to try it out.

[an1mal_69]

Yea, the 1st part of the post was sort of directed at the G man..

Yea, I've just repaired my set, although they were flickering, not completely out..but..snapped the speed needle scraping the flakey conductive paint off, balls.!

What you after for the set you have then :o)

[BUSHWHACKER]

Looking oarsome..!! Excited to see the final install..you coming to Wales in it if there's a run this yr.?

Minor hijack too..Vince, would you have a spare set of clocks for the Lex' or do you use them all.?

I have one spare set, but they don't illuminate.
They can be repaired but I don't have time for all that fuss right now!

Here's what you replace if they don't light up properly...
http://apaqdigital.com/ls400/instrument_circuit.jpg
http://www.lexusownersclub.co.uk/for...hp/t26776.html

This is GWH200's truck by the way, you'll have to ask him if/when he's coming to Wales.(Apart from when he collects the truck that is)

[an1mal_69]

Looking oarsome..!! Excited to see the final install..you coming to Wales in it if there's a run this yr.?

Minor hijack too..Vince, would you have a spare set of clocks for the Lex' or do you use them all.?

[lord lucan]

Almost there....



I'm doing little wee's myself now!

is this a game of spot the 10mm ratchet spanner, [very nice job vincent, i do very like your attention to detail]

[BUSHWHACKER]

thats neater than a factory installation - really clean and tidy - top marks vince

Thanks gary, thats only a test fit!!!!

vince quick question,where youve cut off the standard bonnet catch,do you re weld that section back on after the engines in or do you leave it off and fit rally style bonnet catches,oh and also top workmanship once again vince.

Thanks Mark and yes, that section gets welded back in once the engine is fully fitted.

[surfenstein]

vince quick question,where youve cut off the standard bonnet catch,do you re weld that section back on after the engines in or do you leave it off and fit rally style bonnet catches,oh and also top workmanship once again vince.

[gary-r]

thats neater than a factory installation - really clean and tidy - top marks vince

[hiroler]

Yeah hose sorted I just got a 32mm reducing bend and a heavy duty clamp and no sorted

[gwh200]

Sorry vince...I put him out to stud...

[BUSHWHACKER]

Ross had an enema???


Graham, did you drop this?

[gwh200]

Looking very nice!! And All is running well with mine!! Vince

Excellent Ross. Did you cure your bottom hose prob?

[BUSHWHACKER]

Looking very nice!! And All is running well with mine!! Vince

Excellent.
I haven't seen any videos of it off-road yet, did you have the cloaking device switched on at Avalanche?