@ surfenstien

[scott-lee]

Hows the sticking key thing?

sadly, it's still just that. put one of the spare keys i got with the car on,looks like its never been used,but still being problematic. can't be far off,though, doesn't take a lot to get it to release most of the time.
im getting a lot of interest on FB on the delrin BJ's, droping your name on that one (Over fabrication,anyway) might be worth thinking about getting westcut to quote for a batch?
also going to price up some large dia Ali, after seeing the price of coil spring spacers, i wonder if it might be an idea to do a batch of them for you?
worth a thought,at least.

[surfenstein]

Hows the sticking key thing?

[scott-lee]

wow,mark.............just seen this.
http://www.ebay.co.uk/itm/New-Toyota...item3f4670a588
or even these...........
http://www.ebay.co.uk/itm/mitsubishi...-/330575527265

[scott-lee]

Simple I made the counter bore ones, I couldnt be bothered with the angle, the angle is there so that the spacers are a snug fit on the bump stop turret.

right, that helps,mark. had my head under the truck tonight,trying to figure it out!hope to get a set made this week,but both lathes are full on.(damm work interfering with my mods!) taken the front under bar off and have it in paint shop at the moment,got to make up for lack of machines. looks like i cant work friday afternoon this week either.
bummer.

[surfenstein]

Simple I made the counter bore ones, I couldnt be bothered with the angle, the angle is there so that the spacers are a snug fit on the bump stop turret.

[scott-lee]

yeah,got it Ian. the plan is to get some springs on friday and have a look,see if i can figure out why stringers one has a counter bore instead of that angle in it.
the rest is not far out,dimensionally .
would be helpful if i could see one in use.
im going on a google mision

[BioHazard]

just sent you a link to the original thread. Still trying to see if i had any others

[scott-lee]

interesting the difference between the spacers stringer lent me,and the picture that ian sent me,dimensionally.
but im tempted to go with ians picture,even though the dimensions dont add up!

[BioHazard]

Cool I will see you over there,

You buying breakfast????


I'll pop over about 11.






Thinking about breakfast i have my figure to think off so I'll let you off

[surfenstein]

Cool I will see you over there,

[scott-lee]

Lol, sounds like you had a good afternoon,I will be at the workshop around 11. If you wanna pop over.5

yeah,mate.
key still playing up.
on a plus note,i have done some stuff for you. you might be surprised. not my finest work,but like i said,i'm not a miller,really.
they will need some 'fettling' but nothing parrot can't handle!

it was an interesting experience.

[surfenstein]

Lol, sounds like you had a good afternoon,I will be at the workshop around 11. If you wanna pop over.5

[scott-lee]

well,that was an interesting afternoon................
two of your BJ spacers came flying out the mill and missed me by millimeters !!
i DEFIANTLY think water jetting is the way to do these.
east enough job to do,its just holding the sods.
did my nut in.
my surf saggy rear syndrome is at an all time high,as well. truck is nigh on bottoming out with all the metal in it.(you did say anything i could get!)


im going for a martini..............or 6

[scott-lee]

your missus has found the links,lol.

[scott-lee]

oh,right some bloke asking the easy way to get lift,hieght etc. 160+ comments.
quite interesting,though. gave me something to think about.