general grabbers wont fit!!

[goodcat]

http://picasaweb.google.co.uk/anthon...eat=directlink

do those top tracks come as standard on 3rd gens? (not the bars) or did you put them on mate? they look really good.

EDIT: also when you say you get rubbing, can you be more specific? do they rub on every rotation or only on full lock?

[noobysurfer]

I have the exact same tyres on mine and had busted shocks until yesterday, but they never touched arches or bumper

[Albannach]

Now a picture of the new wheels and tyres next to the originals? A reasonable close up so we can see properly.

[anthony whatford]

do those top tracks come as standard on 3rd gens? (not the bars) or did you put them on mate? they look really good.

EDIT: also when you say you get rubbing, can you be more specific? do they rub on every rotation or only on full lock?

yes standard i think they are on both ones i have had & good thing is unistrut fits!!!!!

[anthony whatford]

Now a picture of the new wheels and tyres next to the originals? A reasonable close up so we can see properly.

new tyres are in boot!

[goodcat]

yes standard i think they are on both ones i have had & good thing is unistrut fits!!!!!

cool. they look good. was thinking about putting some on mine a while ago.

back on topic....you didnt answer my other question. does it rub on each rotaion or only on full lock?
also that other pic would be very handy.

[Albannach]

new tyres are in boot!

Well take one out?

[anthony whatford]

cool. they look good. was thinking about putting some on mine a while ago.

back on topic....you didnt answer my other question. does it rub on each rotaion or only on full lock?
also that other pic would be very handy.

full lock

[anthony whatford]

Well take one out?

surely it needs to be on the wheel to compare the 2 with weight on it

[Albannach]

surely it needs to be on the wheel to compare the 2 with weight on it

No, we'll get a rough idea. I personally can't see why your truck should be different from everyone else's. The only thing that's an unknown (to us) is the tyres.

[anthony whatford]

No, we'll get a rough idea. I personally can't see why your truck should be different from everyone else's. The only thing that's an unknown (to us) is the tyres.

true, the only thing i can think of that it is the suspension but how can you tell, cant bounce it like a car!!!

[goodcat]

full lock

is it just one side that catches?

[wishbone]

The drivers side bumper looks like it's nudged back a bit in this pic ?

Rob.

Dunno about the 3rd gen but on the 2nd you can loosen off the bumper mounts and wiggle it about to re-position slightly. Maybe that could help.

[trev1968]

i run a 3rd gen and it sits a lot higher than that just put new springs an shocks on ride hight went up 1" but it still sat higher think its the shocks an springs ma self works wonders with new ones on

[goodcat]

The drivers side bumper looks like it's nudged back a bit in this pic ?

Rob.

Dunno about the 3rd gen but on the 2nd you can loosen off the bumper mounts and wiggle it about to re-position slightly. Maybe that could help.

if the tyre catches on the front then that could well be a possible answer as it does look a little suspect.
i was going to ask him if it catches at the fron or back. this might help if we knew?

EDIT: if you lot think this is strange how about my surf. the front left tyre catches on the mud guard and i have 31"'s on it. 31"'s were an optional extra so obviously designed to fit on ok? but mine doesnt? plus i think its been raised and despite this it STILL catches! lol