Tweet
heres a couple of pics of Jokers old 3.0l engine.Can you spot whats wrong in the first pic of the block.The other 2 pics are just of the head but thats all looking ok.
-
https://www.facebook.com/groups/henpals/ -
Well, it would appear that the top of the engine is missing. That can cause problems in starting
Although there's a a lot of black at the front cylinderHold my beer and watch this -
the exhausts fallen off
...the fuel pump's in a funny place
......there's a belt missing
.........the top half of the engines fallen off
............there's a few hoses missing
=========
=SOLD UP!=
=========Comment
-
This engine is well and truely seized up.I put a socket and long bar on the bottom pulley and jumped on the bar and it still wouldn't turn so Dave you done it good and proper mate...
https://www.facebook.com/groups/henpals/Comment
-
It's dry!!!!!Too old to care, young enough to rememberComment
-
Hmm, a trick question then. It's quite hard to spot a seized engine from a picture.Originally posted by stormforce View PostThis engine is well and truely seized up.I put a socket and long bar on the bottom pulley and jumped on the bar and it still wouldn't turn so Dave you done it good and proper mate... 
Paul </Slugsie>
Immortal.so far!
Comment
-
his 3rd gen shouldn't suffer the same problem, there's an onboard moisturiser tank to stop them getting too dryOriginally posted by MudSurfer View Post
Hold my beer and watch thisComment
-
normally 2 of the pistons are at the top of the barrels aint they and on this one they are all stuck solid at the bottom of the barrels...Originally posted by Slugsie View PostHmm, a trick question then. It's quite hard to spot a seized engine from a picture.
I may strip this block down and see what exactly needs replacing and keep as a spare if its cheap enough to repairhttps://www.facebook.com/groups/henpals/Comment
-
Can you spot my problem
www.cnpbetterhomes.co.ukComment
-
Thats a nice little hole in that one Chris.https://www.facebook.com/groups/henpals/Comment
-
you have forgotten to put the crankcase breather pipe back onOriginally posted by Tiger View Post
Can you spot my problem 
Look out Eastbourne, the Pandas are coming !Comment
-
Originally posted by stormforce View PostThis engine is well and truely seized up.I put a socket and long bar on the bottom pulley and jumped on the bar and it still wouldn't turn so Dave you done it good and proper mate...
lolglad to see i done a proper job on it
it was a pleasure getting it in that condition
Only Toyota can get you out of shiteComment
-
the truck will hopefully live again soon tho Dave.I'm keeping everything crossed that it starts up ok next week when everything is back onOriginally posted by joker?? View Postlolglad to see i done a proper job on it
it was a pleasure getting it in that conditionhttps://www.facebook.com/groups/henpals/Comment
-
Should everything be that black and sooty?
When my head was off, everything looked clean (ish) certainly no soot, although I guess the mechanic may have cleaned it before I got there, but as you say, two pistons were down in the block, so couldn't be cleaned.Rob
Still working for the man!Comment
-
mmmmmm, anything Veg related?If it can be broken it can be fixedComment
Comment