I've made a few changes since getting the 4runner. Mostly in the fuel system etc by way of a Zavoli LPG fuel injection system and 2 x 50 litre LPG in place of the old winch down spare wheel carrier underneath the rear of the truck. - unfortunately all this added extra weight to an already soggy r.send so on Tony's advice I went for :-
2" lift springs
4 x Pro-comp ES 900 Nitrogen Gas Shocks
Made one hell of a difference, rear end doesn't sag (even under load) handles brilliantly. V.V.PLEASED!!!!
Ranger 5 spoke Alloys with BFG A/T's 31x10.50x15
2 x Rinder Spots 100w
2 x Rinder Fogs 100w
4 x marker lights (sad I know - I guess it's that little bit of trucker in me still)
4 x white strobes
2 x alternating rear reds
(the above are for work and rallying etc - see my profile for explanation)
Sony Single CD Head unit
Alpine T300 amp
Alpine F250 amp
Jensen sub (it was a freebie)
I left all the original Toyota speakers in but added better wiring and for a stock amplified system is bl**dy loud
EGR window deflctors all 'round and an EGR sunvisor deflector too.
Bonnet guard (courtesy of Sumo!!)
Tow point on front
Bash plate/sump guard
LPG bash plate
Air Pipe Mod
Iridium plugs
Next step is to change the brake lines for braided hoses,

 
							
						
					2" lift springs
4 x Pro-comp ES 900 Nitrogen Gas Shocks
Made one hell of a difference, rear end doesn't sag (even under load) handles brilliantly. V.V.PLEASED!!!!
Ranger 5 spoke Alloys with BFG A/T's 31x10.50x15
2 x Rinder Spots 100w
2 x Rinder Fogs 100w
4 x marker lights (sad I know - I guess it's that little bit of trucker in me still)
4 x white strobes
2 x alternating rear reds
(the above are for work and rallying etc - see my profile for explanation)
Sony Single CD Head unit
Alpine T300 amp
Alpine F250 amp
Jensen sub (it was a freebie)
I left all the original Toyota speakers in but added better wiring and for a stock amplified system is bl**dy loud
EGR window deflctors all 'round and an EGR sunvisor deflector too.
Bonnet guard (courtesy of Sumo!!)
Tow point on front
Bash plate/sump guard
LPG bash plate
Air Pipe Mod
Iridium plugs
Next step is to change the brake lines for braided hoses,


 
							
						

 I'll start this off then.....
									
									
									I'll start this off then.....
								
 
							
						 
   
							
						 
 
Comment