yobit eobot.com

Announcement

Collapse
No announcement yet.

Hope someone can help bad shaking on gen2 3.0

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Update

    So another day of testing things.Had battery's off for a couple of hours this morning not sure if this re-set's fault codes.Then took it out it does seem to run better my up/down tick over has gone so one good thing.Took her out to my favorite hill both box's in neutral engine off when braking the shake is still there.So at a loss now.

    Comment


    • #17
      Warped or not seated correctly, discs.

      Comment


      • #18
        Funny i was just on the phone talking to my mate about this so i am going to try another new set on her.Can not do it for a few days start moving house tomorrow .

        Comment


        • #19
          Can you feel the shaking through the steering wheel/pedals or more through the seat?

          Comment


          • #20
            No to the first too and it feels like the cab is going to come off chassis with the shaking it just shakes the whole thing.

            Comment


            • #21
              Body mounting bolts badly rusted or snapped?

              Comment


              • #22
                If it is them time for a 2" lift
                Last edited by Wez ssr-x; 28 November 2013, 16:17.

                Comment


                • #23
                  Ok, my ideas:

                  You say you changed the front wheel bearings, but did you check/change the rear? They might be duff.

                  What about your drive shafts? Maybe the joint has gone, causing it to vibrate under breaking?

                  Comment

                  Working...
                  X