2.4 td

[stormforce]

I'm really interested in the block, i have sent a message to you with my mobile number.....Cheers.

i will ring you tomorrow sometime about it

[mountain_man]

Would there be much work involved converting a 2lt to the electrics of my 2lte?

[TonyN]

to much, you need a crankshaft position sensor vor EFI motors, its done by a hole in block inline with crank, and a notch on crank to trigger sensor, none of which the 2L block has.

[mountain_man]

Thanks Tony, will cancel the purchase of that engine....

[mountain_man]

Hi again guys and an update to my overheating problem....While i was trying to burp the cooling system i noticed bubbles of air coming out of the side of the head. As stated before it has a brand new head. Obviously this is the cause of the overheating. Could it be a botched head job and simply a new head gasket to be fitted will cure the problem???
Really appreciate your help.......

[Justbrad]

I would check the touque on the bolts

[mountain_man]

That's what i think is all that's needed, fingers crossed. Thanks for the reply Brad.....