yobit eobot.com

Announcement

Collapse
No announcement yet.

need a little 2.4 help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • need a little 2.4 help

    Actually, i need alot of 2.4 help!Bought a 2.4 the other day, 1990 and have found a few things wrong that i'd like help with if any can!I'm a total beginner with hilux's, and havent had a 4WD before.
    1.How easy is the tailgate lock to get to?Cos its jammed.
    2.Turbo light doesnt come on when im driving, but it works when i switch on the ignition...does this mean theres something wrong with my turbo and its not working?
    3.Not sure its engaging into 4WD. When i switch it into 4WD no light comes on but i can hear a clicking noise, almost as if something is trying to engage but isnt. However when i put it into High4WD it engages, the noise stops, but still no light....
    4.Also the steering wheel doesnt line up straight with the wheels...do i just take it off and realign it, or is this tracking related?
    Thanks alot, hope you can help!

  • #2
    Hi, tailgate lock- jammed down i pressume- could be that window is not going down all the way?
    Turbo light not on means no turbo- chances are the vacuum pipe has come off. Go under the bonnet and on the top right as you are looking at it you may see a small black pipe has blown off the throttle body- push it back on a hopefully your truck will be twice as fast and the light will come on at 2000 revs.
    Steering is worth getting tracking done if it pulls to one side- if not adjust track rods evenly until steering wheel is aligned, not by moving wheel. But first check tyre pressures.
    Hope this helps.
    Charlie

    Comment


    • #3
      4wd

      dont run a surf on the road in 4wd - you'll kill the transmission. To test if it works, get on a muddy field and have a play.
      If you're gonna be a bear... be a Grizzly.

      Comment


      • #4
        I took the tailgate panel off, because you're right, the window doesnt go down all the way, but i cant see how i can get it to go down all the way, and i still cant get the lock to work!Couldn't find any vaccuum pipes that have slipped off, and still no turbo light. however, when its warmed up, it idles at 1200rpm, and i cant get it to drop below that. could it be that air is getting in somewhere?Any ideas?!

        Comment


        • #5
          Remove the rear window motor to allow the window to drop all the way (3 bolts, 8 or 10mm iirc)

          Rob.

          Comment

          Working...
          X