Diff breather threads

[fatfires]

I know I asked on 'the other site' but in case there is anyone on here that wasn't on there...........you know what I mean!
Can anyone please tell me the thread size on the diff breathers, I want to extend them
TIA

[BUSHWHACKER]

I know I asked on 'the other site' but in case there is anyone on here that wasn't on there...........you know what I mean!
Can anyone please tell me the thread size on the diff breathers, I want to extend them
TIA

If I remember correctly, all you need to do is pop the caps off of the breathers with a screwdriver and push on some suitable size and length plastic or rubber hose and secure with a jubilee clip.

[captain_chaos]

according to this http://www.toyotasurf.asn.au/techsite/diffbreathers.htm you need a 14mm spanner to remove the existing breather. If that's any help

[fatfires]

If I remember correctly, all you need to do is pop the caps off of the breathers with a screwdriver and push on some suitable size and length plastic or rubber hose and secure with a jubilee clip.

Thanks Vince, but mine are internally corroded and externally foobared, if I was to put a jubillee on them they would probably colopse - I am hoping I can get some threaded hose adaptors and do it that way (as per the ausie site)

[Woodzie]

Thanks Vince, but mine are internally corroded and externally foobared, if I was to put a jubillee on them they would probably colopse - I am hoping I can get some threaded hose adaptors and do it that way (as per the ausie site)

I think they are 1/4 bsp

[laser_jock99]

You can buy a diff breather kit on the HPOC website

http://www.hpoc.co.uk/community/inde...showtopic=2258

might need to register to view the thread.

http://www.hpoc.co.uk

[stormforce]

there is a forum member from Newquay that sell the breather kit aswell and also sells on ebay

[plumb bob]

This may help;;

http://www.hiluxsurf.co.uk/forums/sh...=diff+breather

[NiftyNev]

1/8 BSPT according to info on the Aussie site.

Nev

[Blizzard]

You can buy the fitting from Toyota. Part # 90404-51319



David

[TonyN]

1/8 BSPT according to info on the Aussie site.

Nev

yup, this is right.

Tony, I have a box of fittings and loads pipe if you want me to make you up a 'kit'

Probably about £20 all in.

[plumb bob]

I gave Toyota that part number this morning, and asked them to confirm that it would fit my axle, gave frame & model no, and they came back with part no.90930-03031 at twice the price.


So will part no 90404-51319 fit my G285 LSD????

Was hoping to get kit fitted for Strata Florida on saturday.....just in case it's wet in Wales

[The Lovely Boyo]

Was hoping to get kit fitted for Strata Florida on saturday.....just in case it's wet in Wales

Wet??

In Wales????

Nah...........

(And yeah - BSP - on a Jap car!)

[stormforce]

I gave Toyota that part number this morning, and asked them to confirm that it would fit my axle, gave frame & model no, and they came back with part no.90930-03031 at twice the price.


So will part no 90404-51319 fit my G285 LSD????

Was hoping to get kit fitted for Strata Florida on saturday.....just in case it's wet in Wales

that is the same one as i got for mine but i got 2 tho and i pain £8.81 inc vat for the 2.
I would of thought they were the same for the lsd

[plumb bob]

that is the same one as i got for mine but i got 2 tho and i pain £8.81 inc vat for the 2.
I would of thought they were the same for the lsd

90404-51319 = £3.50 ea

90930-03031 = £7.50 ea

Go figure.