yobit eobot.com

Announcement

Collapse
No announcement yet.

gearbox

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by mattys surf
    Yes i think i will but the next place that might be able to do anything is about 50 miles away so will need to sort out a lift.

    I just done some research and I've come up with two posabilities.......

    PCM (powertrain control module)

    EPC (electronic pressure control)

    I'll be back!

    Comment


    • #17
      Originally posted by Taliesins
      I presume it was the o/d light you were watching for the code and not the engine check light. Just a thought
      No i was wathching the engine check light as i did a search on here and it says to watch the engine check light.If i was supposed to check the o/d light i will try this tomorrow.Thanks

      Comment


      • #18
        Originally posted by BUSHWHACKER
        I just done some research and I've come up with two posabilities.......

        PCM (powertrain control module)

        EPC (electronic pressure control)

        I'll be back!
        How do you fix these

        Comment


        • #19
          Originally posted by mattys surf
          No i was wathching the engine check light as i did a search on here and it says to watch the engine check light.If i was supposed to check the o/d light i will try this tomorrow.Thanks
          You watch the engine check light for engine related problems and the O/D on light for gearbox problems. Hopefully you will get a result this time. Best of luck
          Trust your Hound.

          Comment


          • #20
            Ok will have to do this sometime over the weekend ,hope it will work. Thanks
            Dave.

            Comment


            • #21
              Ok i have done the flash test and it now shows codes 61 and 62 but cant find what they relate to so any suggestions would be helpfull.
              Thanks
              Dave

              Comment


              • #22
                Originally posted by mattys surf
                Ok i have done the flash test and it now shows codes 61 and 62 but cant find what they relate to so any suggestions would be helpfull.
                Thanks
                Dave
                Somewhere on here or could be the Aussi site there is a list of codes.
                Have you checked the selenoids? these seem to be the cause of most gearbox probs
                Trust your Hound.

                Comment


                • #23
                  Originally posted by mattys surf
                  Ok i have done the flash test and it now shows codes 61 and 62 but cant find what they relate to so any suggestions would be helpfull.
                  Thanks
                  Dave
                  Here you go mate
                  61 defective no2 speed sensor (in ATM) or severed wire harness or short circuit
                  62 severed no1 selenoid or short circuit or severed wire harness
                  Trust your Hound.

                  Comment


                  • #24
                    Thats great at least i now know what to tell the garage. Thanks very much.
                    Dave

                    Comment


                    • #25
                      Originally posted by mattys surf
                      Thats great at least i now know what to tell the garage. Thanks very much.
                      Dave
                      How did it go at the garage
                      Trust your Hound.

                      Comment


                      • #26
                        Sorry but i have not had the chance to get to the garage as yet. Cant find the time or someone that will get me back home as the garage is about 35/40 miles away.

                        Comment

                        Working...
                        X