Rear Fog Lamp

[kitesurf_phil]

I was thinking also maybe modding the reversing lamps - leave one as is, split the wiring and paint one bulb red.


Quite a few have done this. The details are on the mods section of the hiluxsurf.co.uk site.

[TimberSurf]

I have another idea,

Buy a single, bracketed Fog lamp from Towsure or someone for 2-3 notes and affix to lower round bar of wheel carrier!

Or buy surface mount and just stick to the surface of the bumper, say under the wheel so out of the way

[madcampbell]

Done it!

Took about forty minutes for both light plus a little wiring.

Put lens on bumper and taped around it.
Then cut out inside the tape with an angle grinder (new blade easy as)((covered back of truck to stop spark damage))
Coverd exposed edged of bumpber with stiff rubber tubing about 6mm Dia (B&Q hose pipe drip 10mtrs £5)
Pushed light in from the back.
Job Done

Thanks for the advice guys

PS..
I searched for fog lamps with surrounds at three diffrent breakers only finding one. So decieded to use off the shelf lamps (ones I had already broken off!! )so If I break one I can get a new lens for it.

[Guest]

Took about forty minutes for both light plus a little wiring.

Put lens on bumper and taped around it.
Then cut out inside the tape with an angle grinder (new blade easy as)((covered back of truck to stop spark damage))
Coverd exposed edged of bumpber with stiff rubber tubing about 6mm Dia (B&Q hose pipe drip 10mtrs £5)
Pushed light in from the back.
Job Done

Thanks for the advice guys

PS..
I searched for fog lamps with surrounds at three diffrent breakers only finding one. So decieded to use off the shelf lamps (ones I had already broken off!! )so If I break one I can get a new lens for it.

Very neat job, well done.

Cheers