yobit eobot.com

Announcement

Collapse
No announcement yet.

Turbo light rev counter

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Turbo light rev counter

    I've got a replacement dash which in the Rev counter has the turbo light.

    My existing one hasn't got the light anyone know if its compatable? Is it worth fitting as far as I can see people just get stressed by the uncertaintanty if its normal or overboost.
    Last edited by Ploddit; 14 April 2011, 15:57.

  • #2
    Thats a 2.4 dash binacle.

    Comment


    • #3
      Well all I need is the speedo and I'll do the job on the temp gauge.

      Comment


      • #4
        From memory, they are interchangable, just that the turbo light will never be on on a 3.0.
        Do you know that, with a 50 character limit, it's

        Comment


        • #5
          Thank you gentlemen, Once I've done the temp gauge mod I'll try and stick the whole binnacle on.

          If there is some issue it's not tricky to swap out the individual components if needed later.

          Comment


          • #6
            Temp gauge mod done should be trying it out this weekend I'll report and of course I have an abundance of resistors left over if anyone wants a pair....
            Last edited by Ploddit; 15 April 2011, 22:13.

            Comment


            • #7
              I was going to do that mod so some resistors would be very handy, yes please!

              Thanks,

              Ray.
              I've got a plan and it's as hot as my pants!

              Comment


              • #8
                PM an adress and I'll post em next week.

                Comment


                • #9
                  You're a legend!

                  PM Sent.
                  Last edited by lord_flashart; 16 April 2011, 09:05.
                  I've got a plan and it's as hot as my pants!

                  Comment


                  • #10
                    The 2.4 speedo and temp gauge are both a tiny bit 'greener' than the existing 3.0 ones, but I am a little retentive.

                    Just waiting on some rear heater pipes from Toyota as when I removed mine I holed one. I just want to check the temp guage before I send because I stupidly didn't check their resitances before soldering them in....

                    Comment

                    Working...
                    X