After owning my surf for about six months I decided to investigate why the 'wireless' sounded so dire and invested in some of those radio removal keys and set too to investigate.
After about two seconds of looking I believe I had soiled myself quite heavily at the frankly scary condition of the wiring and so, armed with my trusty crimping pliers and lots of info gleaned from this site, got on with putting it all to rights.
I now have a quite nice sounding affair with rear speakers and an aerial that goes up and down on demand.
Thing is, the clock seems to have retired! All the wires that I messed with had obvious homes to go to. Except one that became live when the lights are switched on, which I took to be for dimming the front of the radio- a facility my radio doesn't have so I taped it up.
The heater plug is in nice and tight, no evidence of any loose wires floating about and I cut nothing just re joined so can't have interrupted any existing connexions. (could I?)
Obviously I've done something I didn't ought to have, does any one know where and how the clock is connected?
After about two seconds of looking I believe I had soiled myself quite heavily at the frankly scary condition of the wiring and so, armed with my trusty crimping pliers and lots of info gleaned from this site, got on with putting it all to rights.
I now have a quite nice sounding affair with rear speakers and an aerial that goes up and down on demand.
Thing is, the clock seems to have retired! All the wires that I messed with had obvious homes to go to. Except one that became live when the lights are switched on, which I took to be for dimming the front of the radio- a facility my radio doesn't have so I taped it up.
The heater plug is in nice and tight, no evidence of any loose wires floating about and I cut nothing just re joined so can't have interrupted any existing connexions. (could I?)
Obviously I've done something I didn't ought to have, does any one know where and how the clock is connected?
Comment