being useless at soldering is there anything i can use to connect an inline fuse to my + terminal on battery and then onto my cable, i'm putting extra cigarette sockets in the boot, one on each side of rear pillar, is it ok to use one battery for one side and other battery for the other ?, i've been warned Scotch Lok connectors are pretty useless
							
						
					Announcement
				
					Collapse
				
			
		
	
		
			
				No announcement yet.
				
			
				
	
extra sockets
				
					Collapse
				
			
		
	X
- 
	
	
		
		
		
		
		
		
		
	
	
Got a part number? The only ones I've found there aren't surface mounted.Originally posted by joker??maplins
http://www.maplin.co.uk/Module.aspx?...ette&doy=14m11Paul </Slugsie>
Immortal.so far!
Comment
 - 
	
	
		
		
		
		
		
		
		
	
	
http://www.workshoponline.co.uk/sear...+ORDER+BY+code
they are for marine applications so are a bit tough and keep out all moistureBunkle
Fox Hunting is Dangerous
Comment
 - 
	
	
		
		
		
		
		
		
		
	
	
Get 4 in a row, surface mount with two self tappers into plastic trim. cut square hole and fit standard Toyota rocker switch ( just for safety's sake).
Halfords :-( do 4 in a strip for about £5 with an LED so you can see if they're on in the rearview mirror! Run cable each side and make all connections inside the trim, plenty of room. I've got 12v in nearside rear pillar and 250v in offside via an inverter. Make sure all wiring is butch enough and fuse both + and - at 20A to make them useful.
							
						Yes! It's still in the garage. M1ROD
Comment
 - 
	
	
		
		
		
		
		
		
		
	
	
dont know part number but got pic , marine typeOriginally posted by SlugsieGot a part number? The only ones I've found there aren't surface mounted.
http://www.maplin.co.uk/Module.aspx?...ette&doy=14m11

anyone want the apple core ??
							
						Only Toyota can get you out of shite
Comment
 


							
						

							
						
							
						
							
						
Comment