yobit eobot.com

Announcement

Collapse
No announcement yet.

hilux surf 3.0 auto relay location

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • hilux surf 3.0 auto relay location

    hi chaps

    i have a 3.0 auto hilux with the 1kz-te motor,whitch wont start it turns over but there,s no juices 2 the heater plugs or the pump valves. i need 2 find the ecd relay and the spill valve relay so i can check wether there is power to the coils then wether the neg switch is comming from the ecu we have a manual but the ecd relay (identified from fuse box lid) has completly different colours and no pin configuration on the relay (four conections two n/o contact and two for the coil wires) .
    ps i have hot wired the pump and heaters and it does run of a fasion
    ,this is making my head hurt lol .

    cheers dreado
    Last edited by dreado; 12 April 2006, 18:16.

  • #2
    Originally posted by dreado
    hi chaps

    i have a 3.0 auto hilux with the 1kz-te motor,whitch wont start it turns over but there,s no juices 2 the heater plugs or the pump valves. i need 2 find the ecd relay and the spill valve relay so i can check wether there is power to the coils then wether the neg switch is comming from the ecu we have a manual but the ecd relay (identified from fuse box lid) has completly different colours and no pin configuration on the relay (four conections two n/o contact and two for the coil wires) .
    ps i have hot wired the pump and heaters and it does run of a fasion
    ,this is making my head hurt lol .

    cheers dreado
    AFAIK these (spill control and ecd injection pump )were introduced in 1999.
    If so, not many on here (me included) have dealings with them. In your shoes, I would be inclined to go to a toyota parts reception and get a print out (or look over his shoulder) when he brings up the screen showing the relay ecd pump and spill valve relay. This does sound like a connector failure which may be an easier fix than you now believe....Sorry I cannot offer experienced based advice - too new for me, sorry !

    Peter

    Comment


    • #3
      still no joy

      its a fresh jap import,it came with one key no fob or plastic thingy.if i go to toyota they will most probly chase me out the reception lol.did they fit a factory imobiliser and where would it be and what will it look like? .also the flasher relay seems to be behind the clocks is it chaps ?.

      ta dreado

      Comment


      • #4
        Have you tried looking at the engine manual. http://www.showmesome.info/hilux/info/manuals/1KZ-TE/

        Comment


        • #5
          cheers andy

          ta m8

          these look like proper scematics ,its registered as a 94 ,are japs better spec ?

          Comment


          • #6
            Won't start

            Hi dreado
            I'm having the same problem with my surf at the moment. Did you managed
            to get your problem sorted?
            Grateful for some advice.

            Cheers
            trachockie

            Comment


            • #7
              sorry mate but the post is over a yr old and the last time he was on was 15th April 2006

              Comment

              Working...
              X