yobit eobot.com

Announcement

Collapse
No announcement yet.

Hilux 3lt Supra project

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by BUSHWHACKER
    I overcome the length problem by wearing a couple of ring doughnuts!
    Tim
    Break It,Fix It,Repeat,Break It,Fix It,Repeat

    Comment


    • #17
      That's an awesome engine. And I should know.
      Here's mine; same engine with some extra goodies:





      In 4R:



      My mechanic:



      If you get it to run, next thing you need is a front brake swap and a few spare rear diffs. If you decide to run a W series gearbox instead of an R series: a few of them also.
      If you have any questions or need detailed pics etc., send me a pm.

      Comment


      • #18
        Thanks for that, pics look brill. project on hold for a couple of weeks as my brother blew up his 2.4 diesel so we are changing his engine at the moment and don't get a lot of time. My main concern is coupling the engine to the box and what conversions i'am gonna have to do. Maybe you can send your mechanic over
        www.cnpbetterhomes.co.uk

        Comment


        • #19
          Thanks.
          You just missed the window of uportunity, was in the UK a few weeks back, could have made you one on the spot if you have a TIG. Cause I still have the jig I used for welding the two bellhousing halves together.
          I used the front half of the 2JZ (manual) housing and the back half of a R gearbox. Cut, align, weld, mill (cause it will warp) and your done.
          Clutch is from a 7M-GE, clutch slave cilinder 4R or 7M.

          And don't forget to check the total height before welding (mblmbl ):

          Comment


          • #20
            That looks tidy. Does that mean i can't do it with an auto box?
            www.cnpbetterhomes.co.uk

            Comment


            • #21
              No, that means mine is converted from auto to manual.
              It is possible to use an A340H (if I recall correctly) with the supra bellhouse, or change the back part of the stock supra box.
              That is if you can get the electronics to work.
              The 2JZ-GE has (part of) the gearbox CU incorporated into the engine ECU. So the software that's in there is also setup for a high power high rev engine.
              So you cannot use an older auto with seperate CU.
              I have no clue what happens if you use a 4R A340H on that ECU.
              i.e.: the 2JZ-GE was equiped with: A340-E (Crown), A340-E-i (also Crown), A650-E (Lexus) etc. Haven't even looked at the supra's yet.
              Worst case scenario is that it shifts too soon, too late or not at all

              Comment


              • #22
                Cheers
                www.cnpbetterhomes.co.uk

                Comment


                • #23
                  Maybe strange question, but why not to use Supra autobox and Supra electronics/ECU? These days you can buy NA engine for like 150 pounds and another 150 for low milage autobox. Anyway Hilux with NA-T engine looks bonkers, although I still prefer smooth shapes of my Supra

                  Comment


                  • #24
                    Ive got th supra loom and ecu chucked in with the engine, To be honest i don't know what i'am doing and always open for suggestions of what will go where. Inherited a supra of my farther inlaw, had to get rid of it gave me a bad back
                    www.cnpbetterhomes.co.uk

                    Comment

                    Working...
                    X