Lexurf VI.

[an1mal_69]

Nice work as always Vince!!

[flounderbout]

Now that's what I'M talking about!!!
Thanks Vince - these will keep the top of my head blowing off with excitement for another little while yet. It looks amazing as ever - a master craftsman at work.
Loving it.

[BUSHWHACKER]

Fuel filter 'housing'....





Transfercase ready... (notice the wall of fame in the background, mine and Lexurf II not there.)

[flounderbout]

wheres all the pics

are the fairys and elves on a go slow in lexurfdom

The fiver's on its way Gary

[gary-r]

wheres all the pics

are the fairys and elves on a go slow in lexurfdom

[BUSHWHACKER]

Hey Vince..sorry, can't find your e-mither in my PP history. Could you post it again

Cheers..

febsnowman@talktalk dot net

Thankyou, have a nice day.

[an1mal_69]

Hey Vince..sorry, can't find your e-mither in my PP history. Could you post it again

Cheers..

[an1mal_69]

Hexcellent..it's all coming together, slowly.

Be able to start on the engine in a wk or two..lol

[BUSHWHACKER]

Did you get chance to send that rubber Vince? How much do I owe you if so?

On it's way mate, sorry for the delay.
£4.21. Cheers.

[an1mal_69]

Did you get chance to send that rubber Vince? How much do I owe you if so?

[Albannach]

no pics - but easy to do. measure the lexus o2 sensor below the plate and cut the boss to suit the depth of the universal ones.

Nae worries. I'll understand better when I get stripping!

[gary-r]

Any pictures of that Gary?

no pics - but easy to do. measure the lexus o2 sensor below the plate and cut the boss to suit the depth of the universal ones.

[Albannach]

if you cut the 2 bolt plate off the original lexus senders and cut a weld-on boss in half and braze it to the plate it leaves the universal o2 senders at the right depth in the manifold.

Any pictures of that Gary?

[BUSHWHACKER]

Marvelous!

Fortunately, Lexurfs VI and VII have the screw in type O2 sensors as standard.
Mine has the mouning plate type though.

[gary-r]

re the lexus o2 sensors vince. just a wee tip.

if you cut the 2 bolt plate off the original lexus senders and cut a weld-on boss in half and braze it to the plate it leaves the universal o2 senders at the right depth in the manifold.

also means with the 2 bolt fixing its easy to get them in and out without having to remove the manifold. did mine cos i got fed up removing the steering shaft to get the drivers one out.

a long extension and they are easy to reach from underneath now.