yobit eobot.com

Announcement

Collapse
No announcement yet.

Lexurf IV.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Originally posted by JUDWAK View Post
    is that one of those tools ya can grap a rent boy and he cant move?
    No idea, perhaps you're better placed to tell us?
    Do you know that, with a 50 character limit, it's

    Comment


    • How goes if vince...
      Non intercooled nothing.

      Comment


      • Originally posted by gwh200 View Post
        How goes if vince...
        I've just re-fitted the ERG junk, mainly for the electrical connections and vacuum lines, and it seems to like it. Plug leads were all correct.
        Going for a blast in a minute, just waiting for the rain....I say rain, it's more like Niagra falls at the moment, I can't see the valley below it's that heavy!

        Oh, and I've removed the bashplate and put it in the boot, 'cos it looks naff!

        Comment


        • Cool. Right I'm off on the school run.
          Non intercooled nothing.

          Comment


          • I know I ain't very quick on the update, but I have just been drooling enviously at your pics gwh (yet again) and err, wasn't the Surf a different colour when it started out? What happened there then?

            Comment


            • It's still the same colour...blue with a hint of silver, and a nice misty buff.
              Non intercooled nothing.

              Comment


              • Oo I like a misty buff. Must be just the light in the pics. Or the fact that my eyes are green is sending me colour blind
                You counting down the hours yet?

                Comment


                • Vince the clamp and sensor is gonna be with you tomorrow recorded delivery
                  https://www.facebook.com/groups/henpals/

                  Comment


                  • Originally posted by Albannach View Post
                    No idea, perhaps you're better placed to tell us?
                    hey its a job
                    am not die lex sick its you that cant read mate

                    Comment


                    • Originally posted by stormforce View Post
                      Vince the clamp and sensor is gonna be with you tomorrow recorded delivery

                      Got 'em, cheers Rich.

                      Send invoice to Graham.

                      Comment


                      • Originally posted by gwh200 View Post
                        Did I mention I'm a div...
                        Waiting for someone to edit my post with an d and i am a positive idiot.
                        [snigger] as if
                        Only Toyota can get you out of shite

                        Comment


                        • Originally posted by joker?? View Post
                          [snigger] as if
                          Hey look everyone...daves here!
                          Non intercooled nothing.

                          Comment


                          • Originally posted by BUSHWHACKER View Post
                            I've just re-fitted the ERG junk, mainly for the electrical connections and vacuum lines, and it seems to like it. Plug leads were all correct.
                            Going for a blast in a minute, just waiting for the rain....I say rain, it's more like Niagra falls at the moment, I can't see the valley below it's that heavy!

                            Oh, and I've removed the bashplate and put it in the boot, 'cos it looks naff!

                            Just been out for a run after stripping out the P/S pump. Had to replace an 'O' ring, stopped leaking now and making a noise like a love-sick Elk!

                            Did a couple of burnouts (Hope the rear tyres still pass the MOT!) so power is back. I found out it was a loose fitting H/T lead on one of the coils. Don't buy those leads again Graham, in fact burn the shop down!

                            Just waiting for it to cool down a bit so I can fit a new jubilee clip to one of the heater hoses, then it's MOT time!

                            Comment


                            • Originally posted by BUSHWHACKER View Post
                              Just been out for a run after stripping out the P/S pump. Had to replace an 'O' ring, stopped leaking now and making a noise like a love-sick Elk!

                              Did a couple of burnouts (Hope the rear tyres still pass the MOT!) so power is back. I found out it was a loose fitting H/T lead on one of the coils. Don't buy those leads again Graham, in fact burn the shop down!

                              Just waiting for it to cool down a bit so I can fit a new jubilee clip to one of the heater hoses, then it's MOT time!


                              Awesome vince.
                              I fitted a new ps pump to a hummer at 3am this morning. It was less elk, more banshee !
                              Are you and the family still coming to easy Sussex trhow weekend.
                              Non intercooled nothing.

                              Comment


                              • Originally posted by gwh200 View Post
                                Awesome vince.
                                I fitted a new ps pump to a hummer at 3am this morning. It was less elk, more banshee !
                                Are you and the family still coming to easy Sussex trhow weekend.

                                Yes mate, all booked up.
                                ETA at the site is 5pm Saturday.

                                Comment

                                Working...
                                X