Starter contacts need replacing.
Announcement
Collapse
No announcement yet.
Cut out, now wont start
Collapse
X
-
Originally posted by Moley View PostCheers, that's good to know but I'm curious as to what caused it to cut out months ago or maybe that was an earth fault I unknowingly cured? Still need to figure out why the safety lock switch isn't working, the 10amp 'stop' fuse is ok.
Comment
-
Think they are ok but will double check. I'll get the starter off and check it. When the break down bloke had a look over the starter the other day he said it only had a cable from the battery going to it. Is the ignition feed wire hidden from sight?
Comment
-
Originally posted by Moley View PostThink they are ok but will double check. I'll get the starter off and check it. When the break down bloke had a look over the starter the other day he said it only had a cable from the battery going to it. Is the ignition feed wire hidden from sight?
Yep, there's a black plastic connector near the main battery cable terminal on the starter.
If one of your batteries is weak/old it will pull the other battery down especially when craking the engine over, which will also accelerate starter solenoid contact wear.
Comment
-
Comment