Tweet
right im making slow progress on the kzn130 conversion. latest issue. sometimes when turn the ignition on we get the engine check light and glow pug light come on. but the glow pug light is flashing in time to the diesel pump clicking (argh). if this happens when cranking we get smoke out of exhaust and it tries to fire up. other times no check light, glow plug light and clicking and will not try to start. so far only had it run for about 2 seconds then cut out. has fuel, good batteries and new fuel filter.
-
-
What are you converting from and to?Do you know that, with a 50 character limit, it's -
it was a 2.4 now a kzn130. taken all wiring, engine, box ecu, the whole shebang over but stupid issues.Comment
-
You have fitted all of the earth bonding straps?Comment
-
It does sound like an earthing issue - or an ECU fried by an earthing issue.Cutting steps in the roof of the worldComment
-
Fried ECU was my initial thought. But if 100% of the wiring has been swapped over, it should be OK?Originally posted by Apache View Post
100% of the wiring was swapped wasn't it? Internal, external, dash, ECU, everything...Do you know that, with a 50 character limit, it'sComment
-
i was thinkin that tonight so going to make some more tomorrow just rule that out.Comment
-
everything was swapped all way back to behind the front seats apart from the fuse box and wiring that went down the near side wing but all wiring looks like it matches up.Comment
Comment