Tweet
Originally posted by hilux303
View Post
yes waiting....................
-
yes waiting....................' You've arrived on a rather special night. It's one of the master's affairs.' -
and waiting' You've arrived on a rather special night. It's one of the master's affairs.'Comment
-
They sure are.Originally posted by nero279 View Postso are they
Stop looking for the Temperature Sensor on the thermostat housing because, if you have one it won't be there. I would have thought that someone on here would know where it is by now. Your model and frame numbers will help identify your vehicle. If you have a latter 2L-T you will have a temperature sensor and a TPS along with an emissions control computer. The temperature sensor will be in the block under the manifold, above the starter roughly between cylinder three and four. The TPS could be on the fuel pump. If earlier it will not have them. Diagnostic codes between the 2L-T and 2L-TE are very different.
NevComment
-
So, just recapping to bump this thread above the other one, we have established that Mr 303 has a late 2-LT and that it does have a TPS, temperature sensor and emissions control 'computer'. We have also established that no-one but Nev knew that.
We have established that 2-LT diagnostic codes and 2-LTE codes are different.
I suppose the next question is: what are the 2-LT diagnostic codes?Comment
-
Here are the pics Chris sent me .....
' You've arrived on a rather special night. It's one of the master's affairs.'Comment
-
WTF is that massive bundle of wires?Comment
-
Thats got me puzzled too .......has someone retrofitted a 2lte in ???Originally posted by Sancho View Post' You've arrived on a rather special night. It's one of the master's affairs.'Comment
-
More likely the other way around - 2LT (which it looks like) in what was a 2-LTE.Originally posted by BioHazard View PostComment
-
Originally posted by Sancho View Post
The truck is a 'g' plate which would be a 2lt' You've arrived on a rather special night. It's one of the master's affairs.'Comment
-
In that case, it's just a late 2-LT with a massive bundle of wires hanging over the engine. Maybe the loom burnt out and they could only get hold of one for a 2-LTE?Originally posted by BioHazard View PostComment
-
yer a bout the wires i hade to repere some of the erth wires so hade to tack the tape and the casing of the wiresComment
-
-
yer i re set the ecu and still have codes 4,7 all the other wires are ok just dont know what code 4 ,and 7 mean duse ne body know what the codes for a 2lt are thanks chrisComment
-
i am trying to do some research atm' You've arrived on a rather special night. It's one of the master's affairs.'Comment
-
Right Matt has some manuals on his down load site.....
http://forums.bauchan.org/portal/dow...hp?dcid=17&p=1
you have to go through all 4 pages' You've arrived on a rather special night. It's one of the master's affairs.'Comment
I wonder where the error codes might have come from 
Comment