yobit eobot.com

Announcement

Collapse
No announcement yet.

Brake problems

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Brake problems

    Ok so mentioned in another thread I when i brake it pulld slightly to the left. so i need to strip down the caliper and clean. I`ve haveged the pads before but not sure about this so....

    a. how do you get the caliper off?

    b. will i loose all my brake fluid?

    c. is it worth getting one of these and changing the fluid while i`m at it? http://cgi.ebay.co.uk/Eezibleed-Kit-...QQcmdZViewItem

    c. is it an easy job to relplace the brake lines for the braded roughtrax ones?

    Thank you all!!

  • #2
    Pinch the flexy hose as close to the caliper as poss. with molegrips or small 'G' clamp, loosen the hose at the caliper, then two bolts (17mm socket) to remove caliper from bracket.

    That 'ezibleed' kit is no good for Surfs, as the fluid reservoir cap isn't a screw on type.

    Comment

    Working...
    X