If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hi, I used Roughtrax 2" lift uprated springs.
Sorry, I can't upload any pics. Keep getting "upload failed" message and I'm sure the files are small enough.
Maybe someone knows why that happened...?
i think you may need to send koi or lucky a tenner by paypal or cheque,this will switch on your pm box and allow you to upload pics.and you get a blue star on your avatar,and one for your surf,and all sorts
i think you may need to send koi or lucky a tenner by paypal or cheque,this will switch on your pm box and allow you to upload pics.and you get a blue star on your avatar,and one for your surf,and all sorts
go on man do it!!!
Ah, I see! Think I might just do that.
By the way, that was your 666th post. Oooooooh! Scary!
Fit them yourself you'll save a small fortune.,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,Theres only seven bolts to undo,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,drop the axle pop old springs out and new ones back in and do bolts back up. I've changed two complete axles in the past week, first one took 4hrs, second time was 1hr 50m. Go on have a go! Just changing the springs should take no more than 1hr.
DON'T FORGET THE SIX ON EACH WHEEL MAKES IT A LOT EASIER TAKING THEM OFF LOL
Comment