water dripping off the block

[The Ferret]

I think we may have sorted it!!!!!

We changed the top seals to find that it still leaked a bit, so we did what we should have done first really..........Checked that the nuts from the fuel pipes into the pump were tight, as we monkeyed with these when changing the head all those months ago.

The dripping stopped after we came across one loose nut, though it only took a fraction of a turn to tighten.

It's not pouring out now, though when the engine is cold there is a slight trickle!! Any ideas!?!?!?!?

Ferret

[BUSHWHACKER]

I think we may have sorted it!!!!!

We changed the top seals to find that it still leaked a bit, so we did what we should have done first really..........Checked that the nuts from the fuel pipes into the pump were tight, as we monkeyed with these when changing the head all those months ago.

The dripping stopped after we came across one loose nut, though it only took a fraction of a turn to tighten.

It's not pouring out now, though when the engine is cold there is a slight trickle!! Any ideas!?!?!?!?

Ferret

I was right, I was right, I was right, I was right,

[Chillitt]

I was right, I was right, I was right, I was right,

smart alec..... why didn't i check this weeks ago?