Slippy auto?

[surfenstein]

Andy just looking at the pics, there does seem to be a lot of cable there, have you given the inner cable a goog hard tug (oooooeeeerrrr missus). Just to make sure it has not snapped.

[MudSurfer]

No - I'll give that a try now - hang on....right, taken some pliers to it, gave it a good yank, doesn't seem to be snapped.

I don't suppose there is any merit in putting a spacer on the bracket that attaches to the intake pipe, to get it to stand off a bit more, and add tension to the cable is there?

Any idea where to get a new cable from?

[surfenstein]

Ok long shot here, but when you had the sump pan off and you were cleaning up the valve block, I dont suppose you would of knocked it and unclipped it from its slider.

[MudSurfer]

Ok long shot here, but when you had the sump pan off and you were cleaning up the valve block, I dont suppose you would of knocked it and unclipped it from its slider.

Unlikely, but I will have a look just in case. I was pretty careful to not adjust/knock anything when I cleaned up the sump and stuff.