Originally posted by gwh200
View Post
Announcement
Collapse
No announcement yet.
hilux hotrod
Collapse
X
-
YesOriginally posted by disco73 View Posti`ve fitted a 2" body lift and i`ve just bought a donor car that had the 35s on, i`ve taken the bigger springs and shocks and fitted them to the back of mine so all that seems ok with loads of room with the 35s on! i havnt got a clue what i`m doing! i`m just fitting it to my truck the way i take it off the donor truck. i`m doing all the work on my own and i`ve lost a bit of skin on my knuckles and a lot of efn and blindin! i managed to do one side of the front this afternoon and found it had 5 metal plates above the ball joint about half an inch thick each so i guess thats a 2 and a half inch ball joint lift! so i`ve managed to fit them to the left side of mine with the extended brake lines. i`ll try the right side tomorrow then fit the wheels and see what the clearance is like!
can i still wind the torsion bar up for more lift with the ball joint spacers?Brian
Comment
-
Yes, think of the TB's as being independant of the BJ Spacers.... however, most folk wind down their TB's after fitting BJ's. you need to maintain a gap between the bump stops otherwise every hole in the road will throw the truck around. Either way, expect to get through CV boots like billy-oOriginally posted by disco73 View Posti`ve fitted a 2" body lift and i`ve just bought a donor car that had the 35s on, i`ve taken the bigger springs and shocks and fitted them to the back of mine so all that seems ok with loads of room with the 35s on! i havnt got a clue what i`m doing! i`m just fitting it to my truck the way i take it off the donor truck. i`m doing all the work on my own and i`ve lost a bit of skin on my knuckles and a lot of efn and blindin! i managed to do one side of the front this afternoon and found it had 5 metal plates above the ball joint about half an inch thick each so i guess thats a 2 and a half inch ball joint lift! so i`ve managed to fit them to the left side of mine with the extended brake lines. i`ll try the right side tomorrow then fit the wheels and see what the clearance is like!
can i still wind the torsion bar up for more lift with the ball joint spacers?"B.A." Baracus: "Talk to me, talk sense so I can talk back. Not all this jibberjabber like breaking the peace and all that."
www.johnthebuilder.info
Comment
-
-
http://www.hiluxsurf.co.uk/showthread.php?t=60178Originally posted by disco73 View Postthe donor truck has them i think! is it to turn it manualy between 4 and 2 wheel drive?
i wouldn`t have a clue how to change them onto my truck! is it a pain to do?
Comment





Comment