Powered side step question

[stormforce]

have you tried Stannah Ian as they do a good range

[POPEYE]

Not been on here for a while Ian, BTW Happy new year to you and your Family. I see you have gone away from air operation, give me a shout if you think I can help......

thanks dave and same to you mate, yeah i decided to use a small winch to pull the step up and air to push it out, got it going up & down and seems good, i'm now in the middle of rigging the air pipework, was scratching my head over some fittings but i think i got over it ok,
just one think, rmrember ages back you sent me a five port switch, i need the round knob for it, any ideas where i can just buy that item, no real prob as i can prob make summat tho

[POPEYE]

have you tried Stannah Ian as they do a good range

they do but i'd need five parking spaces due to the lenght

[Webbo]

thanks dave and same to you mate, yeah i decided to use a small winch to pull the step up and air to push it out, got it going up & down and seems good, i'm now in the middle of rigging the air pipework, was scratching my head over some fittings but i think i got over it ok,
just one think, rmrember ages back you sent me a five port switch, i need the round knob for it, any ideas where i can just buy that item, no real prob as i can prob make summat tho

Let me know what the thread size is Ian I will have a look, I think its M5 but no sure.

[POPEYE]

Let me know what the thread size is Ian I will have a look, I think its M5 but no sure.

I'm not sure about the thread Dave (no idea how to measure it) i can post a close up pic of it tho, you actually sent me two switches at different times, one had a knob on the stick and the other didn't, i used one with a knob on that crane thing i made but as the knob fits both switches i can stick the knob on the one for the step, dont use the crane too much and i already pinched the steel cable off that winch as i accidentally cut into the other one for the step when i ground off the hook, caught the cable and several strands were cut, so this knob aint a big problem,
more pressing tho is the air tube size you sent, can i ask if it was 8mm, i've been useing that as i did'nt have fitting enough to do it in 6mm which is what i piped up the air tanks etc, i have some blue and black which i think you sent,
dont need you to send anything mate, i just need to know what fittings to look for when i order some, i will have to get some reducers from 8 to 6 just to get it up and running, then at some point i'll replace all the 6mm with 8 so it's all the same size, also do they make a "T" piece fitting with two 8mm and one 6mm (on the side)?