Tweet
As title, took the photo but truck doesn't seem to be sitting right or is it me ?
-
-
New wheels? -
Low-slung on the bum-end?Comment
-
I can't quite remember where the slope lies where you took the photo. From what I recall I think the slope is very slightly uphill away from the camera towards where the turck is parked and also fractionally uphill from left to right.
Might be better to take another photo on level ground somewhere, preferably with something straight to make a comparison with (wall, roof line, etc)
I know what you mean though - it does look fractionally lower at the rear compared to the front.Comment
-
Looks to have SAS to me but it could be an optical illusion.If its not broke don't fix it.Comment
-
Spare concrete in the boot?
As has been said, you might have significant cross axle articulation making the ar$e end look lower. If you'd took a pic on the other side I would expect to see the opposite...
... or your springs have gone...
or Judwak's got his magnets underneath your truck...."B.A." Baracus: "Talk to me, talk sense so I can talk back. Not all this jibberjabber like breaking the peace and all that."
www.johnthebuilder.infoComment
-
to much adjustment on the torsion bar?Comment
-
Are you stuck?Sent from the iPad you "lost"Comment
-
Park on level ground and measure front and back, both sides, from bottom of rim to top of wheel arch and post results.
NevComment
-
It looks like the front is higher than the rear! Mine looks higher at front too but when parked on level ground and measured they're level! Nice lookin Truck though
“Do or do not... there is no try.”Comment
-
There's someone gagged and tied up in the boot?Oh Nana, what's my name?Comment
-
Odd angles
Andy,its that heavy weight at the front thats the problem,take the bumper off and post it to me in Macclesfield.
It wont solve your problem but I will be happy,Alan
Last edited by HONEST AL; 3 May 2011, 22:05.Comment
-
Graham?
"B.A." Baracus: "Talk to me, talk sense so I can talk back. Not all this jibberjabber like breaking the peace and all that."
www.johnthebuilder.infoComment
-
-
Totally forgot about this post
sorry guys wasn't ignoring you
These are my standard road wheels with 32 AT's fitted, use them the majority of the time.Originally posted by BUSHWHACKER View Post
That was my thoughtsOriginally posted by spacast View Post
Cheers Puddlesurfer, took me awhile to get it looking how I wanted it.Originally posted by puddlesurfer View PostIt looks like the front is higher than the rear! Mine looks higher at front too but when parked on level ground and measured they're level! Nice lookin Truck though
Take the weight of the front end and it'll make it worse.Originally posted by HONEST AL View PostAndy,its that heavy weight at the front thats the problem,take the bumper off and post it to me in Macclesfield.
It wont solve your problem but I will be happy,Alan
besides you'd have to come collect it.
Think I've found part of the problem, rear ARB brackets on the axle have snapped and it seems to be letting it sit to low, especially with a few little slabs in the back
Comment
Comment