I did something stupid today!

[TonyN]

I've given up with adjustable ones.

Leave it on the the truck, just cut it, bounce truck to center radius arms, sleeve it (inside with bar or outside with tube), weld it back together, black paint.... 15-20 mins tops.

:Gordon Ramsey voice: Done! :/voice:

[surfenstein]

pah..... i can top that.......i do something stupid.......EVERYDAY.

[gwh200]

The current poo wagon has OME shocks,springs andadjustable panhard bar. I'm thinking that in a previous life it was lifted muchly. It's got extended braided brake lines and breathers all round as well...but I'm still stupid.

[tintin]

The current poo wagon has OME shocks,springs andadjustable panhard bar. I'm thinking that in a previous life it was lifted muchly. It's got extended braided brake lines and breathers all round as well...but I'm still stupid.

lovely jubbly......i've got the LC springs in the garage!

Al

[gwh200]

lovely jubbly......i've got the LC springs in the garage!

Al

It's ideal al. I personally would put some BJ spacers in and wind the torsion bars back down. They would be your only purchase. It's got everything else in place, inclucding free wheeling hubs. Just buy some spacers, spend s weekend lifting...ideal.

[Apache]

Its easy, you just need some fat bloke (Brian's not far from you) to shove the side of the truck one way or the other til you can whack the bolt through

[yoshie]

Its easy, you just need some fat bloke (Brian's not far from you) to shove the side of the truck one way or the other til you can whack the bolt through

Friends huh, and here was me thinking of buying a round, when Graham, Andy and I come visit.

[POPEYE]

Did i do it wrong then? when i fitted the LC springs i just lowered the truck down onto it's wheels, bounced it and cut the panard rod in half (it was already off) loosely bolted each end back on and stuck some steel bar up each end, marked it and took it off and tac-welded it, rechecked and then built the weld up till it looked like a solid bar again, it's been ok

dont forget you have to readjust your camber after fitting BJ spacers,

[dieselboy]

I've given up with adjustable ones.

Leave it on the the truck, just cut it, bounce truck to center radius arms, sleeve it (inside with bar or outside with tube), weld it back together, black paint.... 15-20 mins tops.

:Gordon Ramsey voice: Done! :/voice:

This will be done!

Will an air-powered hack saw get through it?

[dieselboy]

It's ideal al. I personally would put some BJ spacers in and wind the torsion bars back down. They would be your only purchase. It's got everything else in place, inclucding free wheeling hubs. Just buy some spacers, spend s weekend lifting...ideal.

Where are you guys buying your BJ spacers from? I could of done that today whilst I had the drive shafts out

[Albannach]

Panhard rod is back being modified, god knows when I'll get it back!

Next weekend is a front suspension overhaul. New Dampers BJs, BJ spacers, TREs, Wheel Bearings and Bronze Bushes.

Will leave the front ARB on for now.

[KERRSURF]

Panhard rod is back being modified, god knows when I'll get it back!

Next weekend is a front suspension overhaul. New Dampers BJs, BJ spacers, TREs, Wheel Bearings and Bronze Bushes.

Will leave the front ARB on for now.

can ye nip round and fit 3 balljoints and some spacers for me seeing as you will have the tools out big man?


cheers.

[Albannach]

can ye nip round and fit 3 balljoints and some spacers for me seeing as you will have the tools out big man?

cheers.

I can nip round and watch you doing it if you like?

I'll bring my 'I'm Andy' t-shirt so that Maggie remembers who I am!

[BUSHWHACKER]

Where are you guys buying your BJ spacers from? I could of done that today whilst I had the drive shafts out

http://www.4crawler.com/4x4/ForSale/ProductLine.shtml

[dieselboy]

http://www.4crawler.com/4x4/ForSale/ProductLine.shtml

Thanks Vince, I was wondering if there was a local place! I.e on the same continent. But, I'll be over there in September... Hand luggage isn't weighed is it now