Phew!! L/C springs on

[stormforce]

what alloy locators were you using,they couldnt of been mine????

if its the ones bio surf has got then they are the ones i bought from you Mark but as my truck is being lifted again i won't need them so sold them on

[Antony_James]

Spoke with Barry from Roughtrax today,,, The biggest shocks they can get hold of is the +2's

So i am faced with the scenario do i

A - Fit the 2 inch units with the 3 inch LC springs on the rear and just get on with it

or do i

B - Send the rear 2 back and go buy 3" Ranchos or OME's or sumthin to match up with the springs better

.............................. ..........................

Wot would u guys do

[surfenstein]

if its the ones bio surf has got then they are the ones i bought from you Mark but as my truck is being lifted again i won't need them so sold them on

well that will be the ones then,so i cant see why they dont fit,coz they fitted on stein and they were all made to the same tolerences.bio if you read this let me know why they didnt fit please.

[tintin]

well that will be the ones then,so i cant see why they dont fit,coz they fitted on stein and they were all made to the same tolerences.bio if you read this let me know why they didnt fit please.

Mark, i had no idea where they came from. But ( check with Paul or Graham ) i think the problem was just that the 'inner' part wouldnt go inside the coil of the spring by a good 6mm or so ( if that makes sense )
I'm sure Gra will explain it better later.

Alan

[BUSHWHACKER]

Spoke with Barry from Roughtrax today,,, The biggest shocks they can get hold of is the +2's

So i am faced with the scenario do i

A - Fit the 2 inch units with the 3 inch LC springs on the rear and just get on with it

or do i

B - Send the rear 2 back and go buy 3" Ranchos or OME's or sumthin to match up with the springs better

.............................. ..........................

Wot would u guys do

Mine are +2" been fitted for four years and are fine.

[surfenstein]

Mark, i had no idea where they came from. But ( check with Paul or Graham ) i think the problem was just that the 'inner' part wouldnt go inside the coil of the spring by a good 6mm or so ( if that makes sense )
I'm sure Gra will explain it better later.

Alan

now that dont make sense,this may sound stupid but you did put the springs in the right way up didnt you.???they do fit honest look.

[Antony_James]

Mine are +2" been fitted for four years and are fine.

thanks for the reply


was just gettin mixed messages from everyone, just wanna make sure before i fit them, there still boxed in me room, didnt wanna try fit them and bugger them up incase i had to send them back

so thanks

[POPEYE]

Cheer's vince, you've cheered me up a bit however can you see the problem now? i've got it up, now i got to get it out
had to undo the roof spotties to move it forward,and back it out,! bugga! hope this dose'nt qualify for IOTW,

think i'll just about manage it, with the missis's scooter in there and a few bags of 3/4 all in, the wifes gonna go ape$hit, i can just about get my leg up there

[tintin]

well that will be the ones then,so i cant see why they dont fit,coz they fitted on stein and they were all made to the same tolerences.bio if you read this let me know why they didnt fit please.

Graham just phoned cos he's reading the posts on his phone but can't reply!
The springs we fitted to Paul's surf were not L/C HDJ80s. They were the standard springs given to him when The Lovely Boyo put bigger ones on his cruiser. It seems the circumference of the two is different!
Mystery solved Mark.
Cheers Gra

Alan

[surfenstein]

phew,thank god for that,cheers guys.i forgot that boyo gave bio standard springs.

[thecaretaker]

you should be ok ian,unless they get picked up on an mot as an advisory,we have got five sets left in stock,not making anymore,so when there gone there gone.

how much are they mark