Can anyone help?

[POPEYE]

With the following air fittings?
1, 2 x 1/8th BSPT threaded 6mm OD push fit conn's
2, 8 x 1/4 BSPT " " " " (like the pic)
3, 2 x 8mm -6mm OD reducers,
4 2 x flow regulators (6 or 8mm) and most importantly!
5, five port 12volt solinoid valve,

I've found some fittings supplyes but cant find the valve, all i've seen are mains or 24v, also found some pipeing diags and looking at em i dont think the soiinoid valve set up on this comp i have is going to work so i think i'd be better leaveing that for air bags (at a later date) and doing the ram from scratch,

If you have/can get (but not pinch) any of the above stuff that would be great, obvisiouly pay ya what you want for em, or can point me to a supplyer that dont cost a fortune, i'd be greatfull, (before i put the gun in my mouth)

[BUSHWHACKER]

http://www.airtechnics.co.uk/catalog...e/catindex.htm

[POPEYE]

http://www.airtechnics.co.uk/catalog...e/catindex.htm

Bl00dy hell Vince! that was quick, ta!!! just spent half an hour typeing that and lost it (error page) dont it make ya want to spit?, thought i'd do it in two bits this time

[nero279]

these guys got a shop just round the corner from me, i got several odd bits from them before - http://stores.ebay.co.uk/THE-HOSE-AN...NG-COMPANY-LTD if they've not got it listed call them 01233 666665 and they'll help you out if they can.

[NiftyNev]

Maybe you can find the solenoid here -

http://www.airlines-pneumatics.co.uk...ctCode=S070124

Nev

[POPEYE]

Thats great! thanks guys,

[BUSHWHACKER]

Here's a diagram to help you Ian....


obviously you'll need to add your switching and speed controller.

[Jonny77]

I have bought pneumatics from these before.... http://www.kiowa.co.uk/

[POPEYE]

Here's a diagram to help you Ian....


obviously you'll need to add your switching and speed controller.

Thanks Vince, i did find a similar diag on "team DaVinci" build tips on google, it was looking at this made me realise the one i got wont work like that, be ok for air bags tho!! more soddin things to do,

Cheers Jonny, i'll have a good look through that

[Webbo]

Ian,
I should have all you need, I will let you know tommorow if thats ok, I think the valve may be 110 volt you may just have to get 12 volt solinoids. If you get sorted before tommorow let me know.

[Webbo]

Ian,
The 8 off 1/4 bspt fittings, are they for 6 or 8mm o/d pipe ?

[POPEYE]

Ian,
The 8 off 1/4 bspt fittings, are they for 6 or 8mm o/d pipe ?

There for 6mm OD tube Dave, and thanks mate once again! if you pm me your address etc and let me know how much i'll owe you, dont forget posage etc, there's no rush as i dont get my money till next wed, so if it's ok i'll send it to ya then, i've seen some tube which is about £12 + for 30mt roll, not to bad! went for 6mm as i already had some fittings that size,

[roylittle0]

Let me know how you get on Ian, ive got some bits in the shed but not sure on size, most of them are 6mm pipe though.



Ill have a look tomorrow if you still need some bits.

[POPEYE]

Bl00dy hell Roy!! thats about two thirds bigger than my little pile, and most of them were the wrong size, thanks for the offer mate, see what Dave has,

[BUSHWHACKER]

Let me know how you get on Ian, ive got some bits in the shed but not sure on size, most of them are 6mm pipe though.



Ill have a look tomorrow if you still need some bits.

Ooh you little hoarder.