i just spend the last hour or so stripping the dash on the surf to get to the speedo face so i could swap it over to the mph one i have ,
i took the clocks/dials etc out, separated the unit, removed the old kph face and fitted the new mph one, so far so good
then i fitted it all back together, turned the key and everything works fine apart from the T-belt light is now permanantly on, and now the fuel guage slowly creeps all the way to the very very end of the guage past full and when i turn the ignition off, does not return to the start,
WHAT THE FECK HAVE I DONE WRONG!!!!
had it all back off again, checked and rechecked wires etc, nothing wrong there, havnt even touched the fuel guage at any point,
someone help please
i took the clocks/dials etc out, separated the unit, removed the old kph face and fitted the new mph one, so far so good
then i fitted it all back together, turned the key and everything works fine apart from the T-belt light is now permanantly on, and now the fuel guage slowly creeps all the way to the very very end of the guage past full and when i turn the ignition off, does not return to the start,
WHAT THE FECK HAVE I DONE WRONG!!!!
had it all back off again, checked and rechecked wires etc, nothing wrong there, havnt even touched the fuel guage at any point,
someone help please
Comment