wheels spacers + :)

[dieselboy]

fitted them today,
that jack thats under the back seats is rubbish! still better than nothing at all!
am i missing something from it though? i have a 2 ft handle with a hook on the end, and the bottle jack.

i had to go and get an adjustable spanner so i could turn the bl00dy thing
then, i had to go to halfords to buy a 19mm socket to bolt the things on :/
then i got a black mans pinch

but it really stops the body roll doesnt it! truck feels a lot more solid now. and when i look in the wing mirrors i can see the wheels

cheers dave!

[marky]

Have you not got the 2 other bits in a tool roll?

[KERRSURF]

yeh, you should have a further extention and a turning L shaped bar.

[BUSHWHACKER]

Nothing wrong with the Surf bottle jack, we used it to do Apache's bodylift.

er I mean on his truck, not man boobs!

[dieselboy]

Ah!





no.


thats prolly why i was having some difficulty.. a adjustable spanner works the same

ive got the bag, but all thats in it, is a shock and a bar, but nothing that would have helped me today

[Albannach]

Have you not got the 2 other bits in a tool roll?

What's the 09183A bit for? That's the only bit of the toolkit (Bar the jack) that I have.

[dieselboy]

Nothing wrong with the Surf bottle jack, we used it to do Apache's bodylift.

er I mean on his truck, not man boobs!

you can get jacks now, thats 3 pumps and its up!

[dieselboy]

What's the 09183A bit for? That's the only bit of the toolkit (Bar the jack) that I have.

you can actually read those letters can you?!

[Albannach]

you can actually read those letters can you?!

Yip...

[BUSHWHACKER]

you can get jacks now, thats 3 pumps and its up!

D'you mean this one?

http://www.machinemart.co.uk/shop/pr...smission-jacks


I have it, and it does fully raise with three pumps, but not when the weight of the truck is on it!

[BUSHWHACKER]

What's the 09183A bit for? That's the only bit of the toolkit (Bar the jack) that I have.

It's something to do with the centre caps on the wheels, but I'm not sure what. I've never used it.

[nero279]

What's the 09183A bit for? That's the only bit of the toolkit (Bar the jack) that I have.

It's a wheel cap replacer, and contrary to popular opinion 09183 is a wheel cap wrench, buggered if i know what either of em do or how to use em though, never had centre caps on mine when i got it.

[yoshie]

D'you mean this one?

http://www.machinemart.co.uk/shop/pr...smission-jacks


I have it, and it does fully raise with three pumps, but not when the weight of the truck is on it!

Vince does that trolley lift the truck clear of the floor without blocks ect

[nero279]

I've got one of these, http://www.screwfix.com/prods/71178/...ack-2-5-Tonne# , it's actually a 3 tonne jack, you can just make out it says 3 tonne in the picture not 2.5. And at £35 quid at the moment you can't go wrong.

It will easily lift the truck off the floor under the rear axle or front crossmember, it's 10mm taller max lift height than the other one too.

[joker??]

Vince does that trolley lift the truck clear of the floor without blocks ect

yep it sure does [in my best vince voice ]