If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
You've got me thinking about that poxy switch now Vince. What method are you planning on using?
Dunno know really, I was just going to kind of copy the drivers window switch, unless you or Apache can design a small circuit or relay set-up that can be spliced into the wiring at the centre consol switch, so that it can be fitted under the consol.
Dunno know really, I was just going to kind of copy the drivers window switch, unless you or Apache can design a small circuit or relay set-up that can be spliced into the wiring at the centre consol switch, so that it can be fitted under the consol.
Will there be limit switches involved? I haven't even looked at the wiring diagrams for the front windows yet!
Doesn't the rear window already have a trip switch? If not, it should be easy enough to add some. Either that or just fine tune the timer when you fit it.
Doesn't the rear window already have a trip switch? If not, it should be easy enough to add some. Either that or just fine tune the timer when you fit it.
I don't think it has, as you can hear the motor straining if you leave your finger on the button or the key turned when the window gets to the end of it's travel.
I don't think it has, as you can hear the motor straining if you leave your finger on the button or the key turned when the window gets to the end of it's travel.
A couple of leaf spring switches should be able to sort that bit out. I'd assume there'll be somewhere to mount them near the glass runner.
Just been and had a look, and have some interior courtesy light timers. 0-60 seconds adjustable. How do they sound? I'll try and dig you the specs out for 'em.
Comment