which pipe on trans. cooler?

[dirtydog]

hope this one helps...

NB: you do not need to cut the rad outlet to gearbox pipe at all, I had to to investigate and cos it was stuck on leave it be and add in the other pipes

[AndyLala]

Good job dirtydog...

andyL

hope this one helps...

NB: you do not need to cut the rad outlet to gearbox pipe at all, I had to to investigate and cos it was stuck on leave it be and add in the other pipes

[dirtydog]

Good job dirtydog...

andyL

Hoorah I finally have become useful

[Chillitt]

well she drives... but she is scent marking... think i should have used 10mm internal pipe, all they had was half inch. bu@@er. thanks for all the help though chaps
and yes the keyboard and mouse are in a right state!

[dirtydog]

the piping i used was 3/8" bore cos thats what Jotto told me to buy and I did. Hardest bit was getting correct fittings as they were some weird German thread.

[Chillitt]

i used the air con rad so its all push fit and jubilee clips. do they make decent jubilee clips anymore?

[dirtydog]

oh right good man - let us know how it goes, i have taken mine out for the mo'.
There are some clips you can buy called 'super hose clamps' which look really good but i decided as its fairly low pressure i'd use julbilee's.

[Chillitt]

get the super ones. really....

[Chillitt]

two things.. if the jubilee clips have 'terry' on them just think of the viz character..
and wynns stockists hire out a thing called a TRANSERVE 2 PLUS which draws out the old fluid and pumps in the new. havent tried it, but it sounds like a good plan..

[dirtydog]

two things.. if the jubilee clips have 'terry' on them just think of the viz character..
and wynns stockists hire out a thing called a TRANSERVE 2 PLUS which draws out the old fluid and pumps in the new. havent tried it, but it sounds like a good plan..

youv'e lost me there mate...?

[Chillitt]

which bit?
yesterday i used a rake of jubilee clips that all striped a thread as they started to tighten.. dull, very dull... they were made by a company called terry apparently, and they arent very good at all. the viz character was terry !!!!wit which is how i felt, having done the hard part but failed cos of cr@ppy clips!

[dirtydog]

which bit?
yesterday i used a rake of jubilee clips that all striped a thread as they started to tighten.. dull, very dull... they were made by a company called terry apparently, and they arent very good at all. the viz character was terry !!!!wit which is how i felt, having done the hard part but failed cos of cr@ppy clips!

all or it but that makes sense now

I just bought the clips from Pirtek where I got the other stuff from - they were really good! i have a couple spare if you need new ones?

[Chillitt]

just been and got some! these are american so they must be good!
(has it come to this? comparing jubilee clips... must get out more!!)

[dirtydog]

just been and got some! these are american so they must be good!
(has it come to this? comparing jubilee clips... must get out more!!)

its like a male version of hair clips I suppose?

[Chillitt]

changed the pipe for 10mm, now my surf is continent again..having removed the cylinder jobbie with the site glass from in front of the radiator,(any one want it?) there is a sensor on the pipe marked 'on 12 off 15' is this the switch for the fans? can i wire this to a switch for those awkward moments? or is enough enough with that dirty great rad on it?
hair grips???? i dont have any hair!!