Air intake hose, pic included

[KERRSURF]

I need the hose and anything else that goes between the plastic intake plenum and the airbox.

[tintin]

Is that a 2.4 Al?

[KERRSURF]

Yeh Alan, it's our pickup build.

[tintin]

Think I have all those bits from my breaker, in my lockup. Will pop down there and check tomorrow mate. If its all there its yours for postage.
check in here in about 24 hours.........
Alan

[KERRSURF]

your a star mate, much appreciated.

[KERRSURF]

Al, can you confirm if the elbow for turbo we have is the correct one or not, if it's not can you supply one of these as well?


We could also use the plastic intake plenum and brackets as well, ours has a lug broken off.

[tweak'e]

it looks like you have got enough room to ditch the factory pipes and put some decent ones in. go up a couple of sizes and put some nice flowing bends instead of that horrible sharp bend before the turbo.

[KERRSURF]

Yeh maybe in the future, this is budget building at the moment.

[tintin]

Sorry mate, been a bit busy!
went to the lock-up this afternoon and this is all i could find!!
Think most of the bits went with the engine as i sold it complete!!




let me know if you want the flexi or the whole filter housing.
Alan

[yoshie]

The flexy please Alan and the rubber feet. Thanks pal.

[KERRSURF]

Yoshie means the rubber mounting pads on the airbox and the flexi hose.

[yoshie]

Yoshie means the rubber mounting pads on the airbox and the flexi hose.

Thanks replying with Drambuie laced functions

[KERRSURF]

Nae excuse, I have Bud and Vodka.


Not in the same glass though.

I updated build thread, on here and HPOC.

[yoshie]

I got the clamp, so with Alan sorting that flexy we have everything to finish.
We can make a mounting bracket and repair the plastic plenum.

[tintin]

Cheers Al, i knew what Brian meant with or without Drambuie!!!
send me an address and i'll get them in the mail....
Alan

aldbuilder AT hotmail.com