kzn 185 parts wanted

[s-dawson]

hi
im looking for some parts from a kzn 185
i need everything around the cylinder head including the head. injectors etc
i need the lower nearside wheel arch trim that goes onto the front bumper.
can anyone help with any of the above.
cheers
steve

[stormforce]

If i'm right in thinking that the kzn130 and the kzn185 are the same head.I have a good head here on the breaker.I need to contact bdt first as to whether his mate is still after a head if not then its up for grabs again

[s-dawson]

kzn 185

cheers rich
i will need everything that goes with it aswell?
also need the top off the air filter and pipe to the turbo
cheers
mate

[stormforce]

is the kzx185 air filter the same as the kzn130.According to roughtrax the heads are the same.I'll see if i can find out about the air filters.I have a decent convoluted hose.I take it you want the manifolds and any pipework thats on or around the head aswell.

[s-dawson]

kzn185

hi yes rich all of the bits.
basically i bought a gen 3 and the head has gone along with all of the associated bits.
i have the inlet manifold but nothing else.
cheers
steve

[stormforce]

Would you want to collect the parts Steve as the head alone weighs in at 27kg's.
The air filter looks different to the kzn130.
I got a good convoluted hose from the kzn130 which may well fit yours.Your welcome to come down and see what else you may need.
Theres no egr fitted to this head as its been blanked off.
The last head i sold was £350 complete plus postage so i would like to get that for it with the other bits i got that you may need.You can give me a ring on 07974183876 if you want.

[s-dawson]

kzn185

Hi Rich
thanks for that but iihave had a change of mind.
im going to go for a new head but i stil req the rocker cover, timing belt cover
and exhaust manifold and heat deflector plate, the top hose conection onto the head also.
i need a set of injectors and the tie bar that goes across the glow plugs.
hope you or anyone can help.
i am told these parts are the same as a gen 2 3L.
cheers steve

[stormforce]

Hi Rich
thanks for that but iihave had a change of mind.
im going to go for a new head but i stil req the rocker cover, timing belt cover
and exhaust manifold and heat deflector plate, the top hose conection onto the head also.
i need a set of injectors and the tie bar that goes across the glow plugs.
hope you or anyone can help.
i am told these parts are the same as a gen 2 3L.
cheers steve

I got another 3.0l coming next week steve so i'll sort out these bits from that truck for you.I should have all of these next week for you.I cant say when exactly as i don't know what day i will be going to chichester to collect it