If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hi Bob - i've got one spare although i have no proof (other than the say so of the chap i bought it from) - long story blew my original 2.4 engine bought a replacement with all sundries - the engine is sweet as a nut - fuel pump should be as well - assuming its the correct spec for you. pm me if you're interested.
Hi Bob - i've got one spare although i have no proof (other than the say so of the chap i bought it from) - long story blew my original 2.4 engine bought a replacement with all sundries - the engine is sweet as a nut - fuel pump should be as well - assuming its the correct spec for you. pm me if you're interested.
I think maybe admin might intervene, and/or people would reply and knock you off the top slot again and again, you would be forever going round in circles.
It appears to be leaking from the o ring between the disdributor block and the pump body, at the back, so can't see exactly due to the engine is in the way.
All the info I've read up on says that the pump will (probably) have to come out, and there in lies the expense.
If the pump has to come out and be re-fitted, it's about £400 labour, then injection specialist to strip, re-seal, bench test and recalibrate, about £350-£400.
Comment