body lift done and silly girlly steps are off

[cheap_skate]

body lift is now done and silly girlly steps are off

the lift kit


befor lift


after lift


the girlly steps are off


no sides lifted


one side lifted



two sides now


the 4WD stick



the worst part of the job was ....
removeing the grill
the 4WD stick
easyer jobs to
lowering the rad was a easy one
front bumper to get off

[BUSHWHACKER]

Marvelous, just needs a good scrub now.

[cheap_skate]

if anyone is intrested in a lift kit we have loads of poly bar left
can be cut to length easy on the drop saw pm me for more intrest



the bolts are stainless steel

[cheap_skate]

Marvelous, just needs a good scrub now.

stop swerring at me
im not washing the smurf

[Balllsy]

Now you need to get a nice set of sliders off Yoshie

[cheap_skate]

Now you need to get a nice set of sliders off Yoshie

im to cheap to buy them ......im in the proess of making some

[gary-r]

im guessing your bolts are A2 or A4 grade.

keep an eye on them as that kind of bolt is a bit brittle for that job. you can get high tensile stainless but its a wee bit pricey. stainless bolts tend to crack when used in a flex type application - eg a body mount.

a normal high tensile plated bolt would have been cheaper and stronger.

they might never break but its worth having a peek at them every now and again especially if you use the truck offroad.

[cheap_skate]

im guessing your bolts are A2 or A4 grade.

keep an eye on them as that kind of bolt is a bit brittle for that job. you can get high tensile stainless but its a wee bit pricey. stainless bolts tend to crack when used in a flex type application - eg a body mount.

a normal high tensile plated bolt would have been cheaper and stronger.

they might never break but its worth having a peek at them every now and again especially if you use the truck offroad.

And the chances of that happening is proble 1000000 to 1
the SS bolts cost me £12 for all 10

[BUSHWHACKER]

And the chances of that happening is proble 1000000 to 1
the SS bolts cost me £12 for all 10

Wow, you're a metallurgist as well?