i have bean looking to get a set of

[jeff.fn02jwa]

i have bean looking to get a set of axle & gear box breather hose and i have had a prop finding the f****g thing so i have found a place that has pos right
hose it is made from polypropoline is this the right stuff to get for making up gearbox & axle breathers the outside diameter is 8mm & the in side diameter is 6mm and the house is rated to 155 psi i know that that the psi rating doze not mater but will house do the job and i req ought else except cable ties

[KERRSURF]

i'll give you 6mts of that pipe on sunday when I see you.

[jeff.fn02jwa]

i'll give you 6mts of that pipe on sunday when I see you.

thanks Alan

[smiffy]

i'll give you 6mts of that pipe on sunday when I see you.

What??? Is there some kind of secret meet??????

[jeff.fn02jwa]

What??? Is there some kind of secret meet??????

no i am going over to scotty to put the electric engager that came off my old gear box to see if we can get his 4 wheel drive working and alan is picking up the wing that i got him from the same surf that i got your spare wheel carrier of m8 are you coming over to

[KERRSURF]

yeh it is a secret, you can come over if you don't tell anyone.

[nero279]

...and i req ought else except cable ties

the push in pipe fittings that screw in the top of the diff?

[jeff.fn02jwa]

the push in pipe fittings that screw in the top of the diff?

there can i get a set i req 4 as i want to do the 2 on the gearbox to m8

[KERRSURF]

I can only get the pipe but carl has sorted me out some fittings, get em at next Clog trip.

[Jonny77]

I bought mine from Kiowa.
Pipe - http://www.kiowa.co.uk/Products/PVC_...on_Tubing.html
Rear axle - http://www.kiowa.co.uk/Products/Pneu...tud_Elbow.html
Front axle - http://www.kiowa.co.uk/Products/Pneu...ale_Run_T.html

Run the pipe from the rear axle to the front, then you only need one filter in the engine bay. I used an aluminium fuel filter off a motorbike for a bit of bling.
Total cost ~£20

[jeff.fn02jwa]

I bought mine from Kiowa.
Pipe - http://www.kiowa.co.uk/Products/PVC_...on_Tubing.html
Rear axle - http://www.kiowa.co.uk/Products/Pneu...tud_Elbow.html
Front axle - http://www.kiowa.co.uk/Products/Pneu...ale_Run_T.html

Run the pipe from the rear axle to the front, then you only need one filter in the engine bay. I used an aluminium fuel filter off a motorbike for a bit of bling.
Total cost ~£20

thanks bud