Wheels for a Surf Gen 3

[smurfyman]

Evening all,
Can anybody confirm whether these would fit My Surf Gen 3? Offset is 6x139.7 for the wheels listed on the eBay link......... eBay 111607770987

Thanks

[J i m s t e r]

It's the PCD that is 6x139.7

The offset is where abouts in the depth of the wheel the bolting face sits.

If the bolt-face was in the exact middle of the wheel-depth, it has no offset.

If it's deeper than the middle (like them deep dish jobs), then it's a negative offset (IIRC) and a positive offset means the opposite - the bolt face is closer to the outer rim than the inner rim.

It may make a difference because the wheel and tyre will stick out that bit more and may catch on full lock when compared to the standard sweep.

[J i m s t e r]

I have seen a few Surfs running on Misterbitchy rims so I'd say they'd be OK. They don't look like they have a mad offset.

[Karma Supra]

Not sure about the offset numbers, but I run some low offset wheels that were originally fitted to a shogun...

The do poke out the arches a little with 285 rubber on them, and I think I needed a little ore lift than most to clear 33s with no scrubbing (after trimming the front bumper spats) buts its worth it. looks great, gives a slightly wider track (which in my mind makes I less likely to fall over)