Front suspension geometry 3rd gen

[Sparkie67]

Hi all, ever since I replaced my shocks and springs, the vehicle tramlines quite badly and I always feel to be correcting the steering.
Checked all mountings, nothing loose etc. The springs from RT were the standard height but stiffer spring. Tyre pressures as they should be.
If it's sitting higher as the spring doesn't compress as much, would that affect the castor / camber angles?
I have found that the toe in is 2mm +/- 2mm according to roughtrax.

Does anyone have the full info before setting off to garage to have it checked, or any other advice that I can look at.

Many thanks

Andy

[tashtego]

I would get the wheel alignment done before looking into anything else, if you haven't already done so.
Cheers

[shokenore]

There you go.
http://www.hiluxsurf.co.uk/showthrea...t=42033&page=2




It is always good practice to get the wheel alignment checked after any suspension adjustments.

[Sparkie67]

Looking at changing springs again before getting it checked. far too bouncy on the road, great ride if you stick a couple of hundred kilos in the back, very smooth.