yobit eobot.com

Announcement

Collapse
No announcement yet.

Starting problem hot/cold

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Starting problem hot/cold

    Have a KZN130 3.0 lt turbo diesel it is hard to start when cold also when hot have to crank it over for about 4-5 sec's before it will fire when hot but it will start straight away if I switch it off then start it within 2-3 sec's later.
    the glow plug light goes out with in 1-2 sec's but if one waits the click can be heard at the end of the heating time (about 10 sec's).
    Any ideas please

  • #2
    Fuel primer (on top of filter) letting air in ?

    Comment


    • #3
      Originally posted by wishbone View Post
      Fuel primer (on top of filter) letting air in ?
      is that on top of fuel filter i assume ? whats the fix or this if its the case ? thanks

      Comment


      • #4
        a new one. I also never start mine from cold without the "click" on a morning, after that throughout the day it fires as I turn the key. H

        Comment


        • #5
          Try glowing up the heaters once or twice more than normal n see how it goes in the morning ..
          Try parking face down hill overnight If ya think the Fuel primer maybe suspect n see how it starts in the morning !!
          Good Luck

          10+ Years of Surfs .... n Faultless to a " T " is my Yota
          Buncefield Burner

          Comment

          Working...
          X