yobit eobot.com

Announcement

Collapse
No announcement yet.

lower ball joint

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • lower ball joint


    hi all ... its time to change the n/s lower ball joint . is it easy to fit ? and is there a pateculour way to change it i have a k reg 2.4 surf many thanks

  • #2
    It's a doddle, 4 bolts, one nut, done!
    Do you know that, with a 50 character limit, it's

    Comment


    • #3
      Originally posted by Albannach View Post
      It's a doddle, 4 bolts, one nut, done!
      And a split pin

      Comment


      • #4
        and a hammer !!!!!!

        Comment


        • #5
          Originally posted by wishbone View Post
          And a split pin
          Not always
          Do you know that, with a 50 character limit, it's

          Comment


          • #6
            Originally posted by rodsurf View Post
            and a hammer !!!!!!
            Luddite!
            Do you know that, with a 50 character limit, it's

            Comment


            • #7
              ball joint

              it just looks a bit tight in there will it come out ok ... i was speaking to a friend and he said i had to strip the hub down to do it ? hope not will give it a go lol

              Comment


              • #8
                Originally posted by mud bath 21 View Post
                it just looks a bit tight in there will it come out ok ... i was speaking to a friend and he said i had to strip the hub down to do it ? hope not will give it a go lol
                It will come out no bother. The joint its self is bolted to the hub and the pin goes down through the wishbone. It's one of the easiest Ball Joints I've ever done!
                Do you know that, with a 50 character limit, it's

                Comment


                • #9
                  Nice big ball joint splitter, job done, easy peasy !
                  3rd gen 3.0 SSR-V '98 R

                  Comment


                  • #10
                    Originally posted by malxwal@yahoo.co.uk View Post
                    Nice big ball joint splitter, job done, easy peasy !


                    And I'm a luddite lmao

                    Comment


                    • #11
                      Hey, if it's knackered, I'm not pussying around getting it off intact
                      3rd gen 3.0 SSR-V '98 R

                      Comment


                      • #12
                        thanks

                        Thanks all i gave it ago and i done it after 3 plasters and a lot of swearing lol

                        Comment

                        Working...
                        X