Tweet
hey people. my light is on. so i did the paperclip chek and have narrowed it down. 2 coolant temp sensor. turbo sensor or air mass sensor. as it still has full power and boost. i would imagine it only to be coolant temp sensor. when i start it up 1st thng. it runs lumpy for 40 secs. i hav to hold the revs. and then when driving. wont engage top gear. (AUTO BOX 3.0). any ideas????????
-
-
Yep, coolant sensor. It won't 'lock-up' until the ECU thinks the engine is warm.
eml?Do you know that, with a 50 character limit, it's -
eml=== Engine Management Light. === cheers dude. now do i ebay or roughtrax the badboy.. cheersComment
-
Breaker. IIRC this is a very expensive sender.Originally posted by wattyR1 View PostDo you know that, with a 50 character limit, it'sComment
-
Check the plug on the sensor first, could be a break in the wiring due to heat and vibration.Comment
-
do u know wher it is vince? it may just b full o crap. i was up to the handles in the river.Comment
-
I know where it is, you really should have asked me too...Do you know that, with a 50 character limit, it'sComment
-
hehe . wher is it dude? u i did tell u wot eml is... so u owe me. lolComment
-
sorry to interrupt...
whats the paperclip check?私のホバークラフト は鰻が一杯です。Comment
-
That doesn't count, you made it up yourself.Originally posted by wattyR1 View PostDo you know that, with a 50 character limit, it'sComment
-
Reading the ECU fault codes. Use a paper clip to bridge the contacts in the test socket.Originally posted by blackpoolsparks View PostDo you know that, with a 50 character limit, it'sComment
-
eml is the term we use at the dealership. all that aside. can ANYBODY tell me wher the coolant temp sensor is??Comment
-
Not sure on the 3.0, but on the 2.4 it's under the inlet manifold.Comment
-
Same on the 3 Ltr. Not sure of exact location but somewhere near centre of block. Same sensor as the 2.4.Originally posted by BUSHWHACKER View Post
NevComment
Comment