yobit eobot.com

Announcement

Collapse
No announcement yet.

Who's Good at diagnosing Noises from a surf???

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by stormforce View Post
    put the jack under the front cross member then jack then jack the front up
    nah!!! i'll just use my BIG trolley jack.... come to think of it i dont think the bottle jack is even in truck ATM!!!!

    Comment


    • #17
      Originally posted by BigBobE View Post
      nah!!! i'll just use my BIG trolley jack.... come to think of it i dont think the bottle jack is even in truck ATM!!!!
      Well if it's not in the truck, it'll not be that that's rattling. So cross it off the list.
      Do you know that, with a 50 character limit, it's

      Comment


      • #18
        Originally posted by Albannach View Post
        Well if it's not in the truck, it'll not be that that's rattling. So cross it off the list.
        no this is strong vibration in passenger footwell, and a bit of vibration on the drivers side, feel nothing through steering,

        Comment


        • #19
          Zer common problem viz zer rattling int vibration is an Freudian problem. Zis problem vill stem from your childhood... Havi g zer therapy vil enable you to dispel zer rattle from your mind.
          Ozzervize it ist zer bronze bushes or zer driving shaft problem
          Non intercooled nothing.

          Comment


          • #20
            Originally posted by BigBobE View Post
            no this is strong vibration in passenger footwell, and a bit of vibration on the drivers side, feel nothing through steering,
            UJ/Hardie spicer may be feced, check for very slight play
            Brian

            Comment


            • #21
              Originally posted by yoshie View Post
              UJ/Hardie spicer may be feced, check for very slight play
              : HARDIE SPICERS.....

              Comment


              • #22
                It's probably an excess of joy causing the problem. Everyones much to happy. The whole situation needs a downer putting on it.....luckily for us albannach is back off holiday...
                Non intercooled nothing.

                Comment


                • #23
                  Originally posted by BigBobE View Post
                  : HARDIE SPICERS.....
                  needle bearing races in the joint on ends of props

                  http://en.wikipedia.org/wiki/Universal_joint
                  Brian

                  Comment


                  • #24
                    Originally posted by yoshie View Post
                    needle bearing races in the joint on ends of props

                    http://en.wikipedia.org/wiki/Universal_joint
                    ah yeah i know what ya mean now, just changed the 2 uni's on my prop shaft on saturday

                    Comment


                    • #25
                      Then are you sure you put the prop back on whence it came off??
                      That could be your vibration guvnor. It may be worthwhile turning the prop round on the flange.. That's if you didn't put it back where it came from
                      Non intercooled nothing.

                      Comment


                      • #26
                        Originally posted by gwh200 View Post
                        Then are you sure you put the prop back on whence it came off??
                        That could be your vibration guvnor. It may be worthwhile turning the prop round on the flange.. That's if you didn't put it back where it came from


                        Nice choice.

                        Comment


                        • #27
                          Originally posted by BUSHWHACKER View Post
                          Nice choice.
                          Well I'm scared now albannach is back off holiday...
                          Didn't feel I could say "where it"....
                          Non intercooled nothing.

                          Comment


                          • #28
                            Originally posted by gwh200 View Post
                            Then are you sure you put the prop back on whence it came off??
                            That could be your vibration guvnor. It may be worthwhile turning the prop round on the flange.. That's if you didn't put it back where it came from
                            i took prop off.... drove it for the week in 4wd.... minus prop...

                            changed uni's, then re-installed prop, now noise is getting worse.... could it be prop??? i have it back on the same way i took it off, with the 2 end lined up together..... if it wasnt bucketing down rain i would go and take a photo :P

                            Comment


                            • #29
                              brake pads
                              I NEEED MUD.....and Welsh spring water!!!

                              Comment


                              • #30
                                Originally posted by evildwarf View Post
                                brake pads
                                would the feel and sound like a hammer drill???

                                Comment

                                Working...
                                X